Being Physics’ lover right from
my childhood I was always excited by the miracles serviced by integrated
circuits in hand-held radios, televisions and personal computers. These
electronics gadget appeared like Aladdin's Jinni to me. While young, I used
to stare at these circuit boards as my technician uncle repaired the
Television Sets. Even Electricity was another mystery for me. Then my early
school showed me the principles of electrical currents. Here I was surprised
to know that current is just a convention when actual thing that cause the
power to run was the electrons flow that is in opposite directions. From
such experiences I decided to dive deep into the trenches of electronics
rather than float at the shallows of its applications. Though blurred and
unclear, I had an aim to be in action of the jet-speed technology. I dreamed
to be in the list of names that gave birth to a principle or an important
utility that revolutionizes world.
My passion includes Digital Hardware design and development. The electronics
serve applications in gamut of its forms which ranges from
microcontroller/microprocessor to creating your own integrated chip using
ASIC design. My two year experience in Firmware design gives me a good hold
over the microcontroller and logic design. I was involved in Vending Machine
development group in Godrej's Electronics Technology Solution Provider
department where I was developing ASM assembly code for a 8051 based
microcontroller. I was also employed by one of the Indian biomedical firms
where I was involved in developing applications using MSP430 based devices.
Then, I diverted my attention towards specializing on core-design in
Computer Engineering through a Masters Course at Drexel University. My
favorite topics involve FPGA, Computer Architecture and EDA Tool
Development. My M.S. co-op involves an introduction to ASIC world and
developing testbenches for the design components.
| |
|
| |
Contact: yan25@drexel.edu
|
| |
| |
Master-Level Co-Op, ASIC Development |
| |
Testing and
verification of RTL designs at InterDigital Communications
Corporation, King of Prussia |
| |
| |
Master of Science, Computer Engineering |
| |
Graduate Student at
Drexel University, Philadelphia in Computer Engineering department,
focusing on hardware engineering and ASIC/FPGAs |
| |
| |
Sr.
R&D Executive, Embedded Systems |
| |
Embedded systems based
medical device development @ Maestros Mediline Systems Limited,
Mumbai |
| |
| |
Engineer, ETSP |
| |
Beverage Vending
Machine Development in the group of Electronics Technology Solutions
Provider @ Godrej and Boyce Mfg. Co. Ltd. , Mumbai |
| |
| |
Bachelors of Engineering |
| |
K.J.Somaiya College of
Engineering Mumbai University, Mumbai, India |
| |
