Publications:

a.1 Books

  1. Forgacs, G. and Sun, W., Biofabrication: Micro- and Nano-Fabrication, Printing, Pattering, and Assemblies; Elsevier, William Andrew Applied science Publishers, 2013, ISBN: 978-1-4557-2852-7.
  2. Chang, R. and Sun, W., “Biofabrication of three-dimensional liver cell-embedded tissue constructs for in vitro drug metabolism models”, LAP Lambert Academic Publishing, 2009, ISBN: 978-3-8383-2150-9.
  3. Nair, K., Yan, K. and Sun, W., “Multi-scale computational modeling and characterization of bioprinted tissue scaffolds”, VDM Verlag Publishing House Ltd, 2009; ISBN-13: 978-3-6390-9907-2.
  4. Starly, B. and Sun, W., “Biomimetic Design and Fabrication of Tissue Engineered Scaffolds”, VDM Verlag Publishing House Ltd, 2007, ISBN: 978-3-8364-2464-6.

a.2 Book Chapters

  1. Hamid, Q. and Sun, W., “Computer-Aided Tissue Engineering for Modeling and Fabrication of 3D Tissue Scaffolds”, invited book chapter in “Biomaterials and Regenerative Medicine” Editor, Ma, P. Cambridge University Press, in press.
  2. Yildirim, E., Chang, R., Guceri, S., Emami, K., Jeevarajan, A., Wu, H. and Sun, W., “Biomanufacturing of PCL Tissue Scaffolds and Cell-Integrated Tissue Constructs”, invited book chapter, edited by Drs. James J. Yoo and Anthony Atala, "The Handbook of Enabling Technologies for Regenerative Medicine", Artech House Inc., (Norwood, Massachusetts), in press.
  3. Hamid, Q., Wang, CY, Snyder J. Zhao, Y. and Sun, W., “A Digital Microfabrication System for Fabrication of Cancerous Tissue Models” invited book chapter in Biofabrication: Micro- and Nano-Fabrication, Printing, Pattering, and Assemblies; Elsevier, William Andrew Applied science Publishers, 2013, ISBN: 978-1-4557-2852-7.
  4. Chang, R., Emami, K., Jeevarajan, A., Wu, H. and Sun, W., “Microprinting of Liver Micro-organ for Drug Metabolism Study”, invited book chapter in "Biological Microarrays: Methods and Protocols" in "Methods in Molecular Biology 671, edited by Ali Khademhosseini, Kahp-Yang Suh and Mohammed Zourob, Humana Press, 2011, ISBN: 978-1-934115-95-4; 219-237.
  5. Wettergreen, M.A., Bucklen, B. S. Liebschner, M. A. K. and Sun, W., “Biofabrication of three-dimensional liver cell-embedded tissue constructs for in vitro drug metabolism models”, in Virtual Prototyping & BioManufacturing in Medical Applications, Editors by Bopaya Bidanda · Paulo J. Bartolo, Springer Publishing, 2008, ISBN: 978-0-387-33429-5, 87-112.
  6. Shor, L., Yildirim, E., Guceri, S. and Sun, W., “Precision Extruding Deposition for Freeform Fabrication of PCL and PCL-HA Tissue Scaffolds”, invited book chapter, edited by Yuan-Shin Lee and Roger Narayan, "Printed Biomaterials: Novel Processing and Modeling Techniques for Medicine and Surgery", Springer Publishing, 2009, ISBN 978-1-4419-1394-4, 91-110.
  7. Blackmore, D., Mileyko, Y., Leu, M., Regli, W. and Sun, W., “Computational Topology and Swept Volumes”, DIMACS Series in Discrete Mathematics and Theoretical Computer Science, Vol. 67: Geometric and Algorithmic Aspects of Computer-Aided Design and Manufacturing, edited by Ravi Janardan, Michiel Smid and Debasish Dutta, American Mathematical Society, 2005, 53-78.
  8. Yildirim E.D., Gandhi M., Fridman A., Guceri S. and Sun W., “Plasma Surface Modification of Three Dimensional Poly (e-Caprolactone) Scaffolds for Tissue Engineering Application”, in “Plasma Assisted Decontamination of Biological and Chemical Agents”, NATO Science for Peace and Security Series A: Chemistry and Biology, Springer Publishing, 2008: ISBN: 1874-6468, 191-202.

b. Referred journal articles:

1.      Snyder, J., Hunger, P., Wang, CY., Hamid, Q., Wegst, U. and Sun, W., Combined Multi-Nozzle Deposition and Freeze Casting Process to Superimpose Two Porous Networks for Hierarchical 3-Dimensional Microenvironment”, Biofabrication, in press.

2.      Zhang, T., Ouyang, L., Chang, K., and Sun, W., “Mechanical Property Characterization of Bioprinted in vitro Soft Tissue Model”, Biofabrication, in press.

3.      Ringeisen, B., Pirlo, R., Wu, P., Boland, T., Huang, Y., Sun, W., Hamid, Q. and Chrisey, D., “Cell and organ printing turns 15: Diverse research to commercial transitions”, MRS Bulletin, 2013, 38, 834-843.

4.      Rodriguez-Devora, J. Ambure, S., Shi, ZD, Yuan, Y., Sun, W. and Xu, T. Physically facilitating drug-delivery systems”, Therapeutic Delivery, 2012, 3(1), 1-15.

5.      Ayan, H., Yildirim, E., Pappas, D., and Sun, W., “Development of a cold atmospheric pressure microplasma jet for freeform cell printing”, Applied Physics Letters; 99, 2011, 111502; 1-3.

6.      Yildirim, E., Pappas, D., Güçeri, S. and Sun, W., “Enhanced cellular functions on polycaprolactone tissue scaffolds by O2 plasma surface modification”, Plasma Processing Polymers; 2011, 8; DOI: 10.1002; 1-8.

7.      Snyder, J., Hamid, Q., Wang, W., Chang, R., Emami, K., Wu, H. and Sun, S., “Bioprinting cell-laden matrigel for radioprotection study of liver by pro-drug conversion in dual tissue microfluidic chip”, Biofabrication, 2011, Vol. 3, doi:10.1088/1758-5082/3/3/034112: 1-9. \

8.      Hamid, Q., Snyder, J., Wang, C., Timmer, M., Hammer, J., Guceri, S. and Sun, W., “Fabrication of three-dimensional scaffolds using the precision extrusion deposition with an assisted cooling”, Biofabrication, 2011, Vol. 3, doi:10.1088/1758-5082/3/3/034109: 1-11.

9.      Huang, G., Zhou, L., Zhang, Q., Chen, Y., Sun, W., Xu, F. and Lu, T., “Microfluidic hydrogels for tissue engineering”, Biofabrication 2011, Vol. 3, doi:10.1088/1758-5082/3/1/012001: 1-13.

10.   Chang, R., Emami, K., Wu, H. and Sun, W., “Biofabrication of a Three-Dimensional Liver Micro-Organ as an In Vitro Drug Metabolism Model”, Biofabrication, 2010, Vol. 2, doi:10.1088/1758-5082/2/4/045004: 1-11.

11.   Buyukhatipoglu K., Chang R., Sun W., Morss Clyne A., “Bioprinted Nanoparticles for Tissue Engineering Applications”, Tissue Engineering Part C: Methods. August 2010, 16(4): 631-642.

12.   Yan, K., Nair, K. and Sun, W., “Three Dimensional Multi-Scale Modeling and Analysis of Cell Damage in Encapsulated Alginate Scaffolds”, Journal of Biomechanics, 2010, Volume 43, Issue 6, 1031-1038.

13.   Yildirim, E., Besunder, R., Pappas, D., Allen, F., Güçeri S., and Sun, W., “Accelerated differentiation of osteoblast cells on polycaprolactane scaffolds driven by combinatorial effect of protein coating and plasma modification”, Biofabrication, 2010, 2(1), doi:10.1088/1758-5082/2/1/014109: 1-12.

14.   Buyukhatipoglu, K., Jo, W., Sun, W., Morss-Clyne, A., “The Role of Printing Parameters and Scaffold Biopolymer Properties in the Efficacy of a New Hybrid Nano-bioprinting System”, Biofabrication, 2009, 1(3), doi:10.1088/1758-5082/1/3/035003: 1-9.

15.   Khalil, S and Sun, W., “Bioprinting of Endothelial Cells with Alginate for 3D Tissue Constructs”, ASME Transactions, J. of Biomedical Engineering, 2009, 13(11), July, 1-13.

16.   Nair, K., Gandhi, M., Khalil, S., Yan, K., Marcolongo, M., Barbee, K. and Sun, W., “Characterization of cell viability during bioprinting process”, Biotechnology Journal, 2009, Vol. 4 (8), 1168-1177. 

17.   Shor, L., Chang, R., Güçeri, S., Gondon, J., Kang, Q., Hartsock, L., An, Y. And Sun, W., “Precision Extruding Deposition (PED) Fabrication of Polycaprolactone (PCL) Scaffolds for Bone Tissue Engineering”, Biofabrication, 2009, 1(1), doi:10.1088/1758-5082/1/1/015003: 1-10.

18.   Yildirim, E., Besunder, R., Allen, F., Güçeri S., and Sun, W., “Fabrication and Plasma Treatment of 3D Polycaprolactane Tissue Scaffolds for Enhanced Cellular Function”, 2008, J. of Virtual and Physical Prototyping, Vol. 3 (4), 199 - 207.

19.   Yildirim, E., Yin, X., Nair, K. and Sun, W., “Preliminary study on fabrication, characterization and endothelial cell cytocompatibility study of alginate/single-walled carbon nanotube tissue scaffolds”, Journal of Biomedical Materials Research: Part B - Applied Biomaterials, 2008, 87B, 406-414.

20.   Vondran, J., Sun, W. and Schauer, C., “Electrospanning Cross-linked, Electrospun Chitosan-PEO Nanofiber Mats”, Journal of Applied Polymer Science, 2008, 109(2), 968-975.

21.   Chang, R., Nam, J. and Sun, W., “Computer-Aided Design, Modeling, and Freeform Fabrication of 3D Tissue Constructs for Drug Metabolism Studies”, Computer-Aided Design and Application, 2008, Vol. 5, p. 21-29.

22.   Chang, R., Nam, J. and Sun, W., “Direct Cell Writing of 3D Micro-organ for In Vitro Pharmacokinetic Model”, Tissue Engineering, 2008, 14(2), 157-169.

23.   Nair, K., Yan, K. and Sun, W., “A computational modeling approach for the characterization of mechanical properties of 3D alginate tissue scaffolds”, Journal of Applied Biomaterials and Biomechanics, 2008, 6: 35 – 46.

24.   Shor, L., Guceri, S. Wen, X., Gandhi, M. and Sun, W., “Solid Freeform Fabrication of Polycaprolactone/Hydroxyapatite Tissue scaffolds”, Trans ASME: Journal of Manufacturing Science and Engineering, 2008, Vol. 130, 021018-1 to 021018-6..

25.   Chang, R., Nam, J. and Sun, W., “Effects of Dispensing Pressure and Nozzle Diameter on Cell Survival from Solid Freeform Fabrication-based Direct Cell Writing”, Tissue Engineering, 2008, 14(1): 41-48.

26.   Yildirim, E., Ayan, H., Vasilets, V., Fridman, A., Guceri, S. and Sun, W., “Effect of Dielectric Barrier Discharge Plasma on the Attachment and Proliferation of Osteoblasts Cultured over Poly (epsilon-Caprolactone) Scaffolds”, Plasma Processes & Polymers, 2008, 5(1): 58-66.

27.   Shor, L., Guceri, S., Wen, X., Gandhi, M. and Sun, W., “Fabrication and Cell-matrix Interaction Study on 3D Polycaprolactone/Hydroxypatite Tissue Scaffolds”, Biomaterials, 2007, 28(35), 5291-5297.

28.   Nair, K, Yan, K. and Sun, W., “A Multi Level Numerical Model for Quantifying Cell Deformation in Encapsulated Alginate Structures”, J. of Mechanics of Materials and Structures, 2007, 2(6), 1121-1142..

29.   Li, J., Regli, W. and Sun, W., “An Approach to Integrating Shape and Biomedical Attributes in Vascular Models”, Computer-Aided Design, 2007, 39(7), 598-609.

30.   Starly, B., Yildirim, E. and Sun, W., “A Tracer Metric Numerical Model for Predicting Tortuosity Factors in 3D Porous Tissue Scaffolds”, Computer Methods and Programs in Biomedicine, 2007, 87, 21-27.

31.   Gomez, C., Shokoufandeh, A. and Sun, W., “Unit-Cell Based Design and Modeling in Tissue Engineering Applications”, Computer-Aided Design and Application, 2007, Vol. 4(5), 649-657.

32.   Starly, B. and Sun, W., “Internal Scaffold Architecture Designs using Lindenmayer Systems”, J. of Computer-Aided Design and Application, 2007, Vol. 4, 395-403.

33.   Nam, J, Starly, B. and Sun, W., “Computer-Aided Tissue Engineering: Design by Chip”, J. of the Biochemist, 2007, 29(1), 20-23.

34.   Khalil, S. and Sun, W., “Biopolymer Deposition for Freeform Fabrication of Hydrogel Tissue Constructs”, J. of Materials Science and Engineering C, 2007, 27(3): 469-478.

35.   Tseng, J. and Sun, W., “Dynamic Response of Cantilevered Rail Guns Attributed to Projectile/Gun Interaction – Theory”, IEEE Transactions on Magnetic, 2007, 43(1), 207-213.

36.   Darling, A. and Sun, W., “Orthotic design through 3D reconstruction: a passive assistance ankle foot orthotic”, J. of Applied Bonic and Biomechanics, 2006, 3(2), 93-99.

37.   Piatt, J., Starly, B., Faerber, E. and Sun, W., “Application of Computer-Aided Design Methods in Craniofacial Reconstructive Surgery Using a Commercial Image-Guidance System”, J. of Neurosurgery, 2006, 104(1 Suppl), 64-67.

38.   Evans, P., Starly, B. and Sun, W., “Computer-Aided Tissue Engineering for Design and Evaluation of Lumbar-Spine Arthroplasty”, Computer-Aided Design and Application, 2006, 3(6), 771-778.

39.   Sun, W., Yan, Y., Lin, F. and Spector, M., “Biomanufacturing: A US-China National Science Foundation-Sponsored Workshop”, Tissue Engineering, 2006, 12(5), 1169-1181.

40.   Starly, B. Lau, W., Bradbury T. and Sun, W., “Interior Architecture Design and Freeform Fabrication of Tissue Replacement Structures,” Computer-Aided Design, 2006, 38(2), 115-124.

41.   Fang, Z., Yan, C., Sun, W., Shokoufandeh, A. and Regli, W., “Homogenization of Heterogeneous Tissue Scaffold: A comparison of mechanics, asymptotic homogenization, and finite element approaches”, J. of Applied Bonic and Biomechanics, 2005, 2(1), 17–29.

42.   Darling, A., Shor, L., Khalil, S., Mondrinos, M., Lelkes, P., Guceri, S. and Sun, W., “Multi-Material Scaffolds for Tissue Engineering,” Macromolecular Symposia, 2005, 227 (1),  345-356.

43.   Wettergreen, M., Templeton, A., Bucklen, B., Sun, W. and Liebschner, M., “Computer Aided Tissue Engineering of Human Vertebrae,” Annals of Biomedical Engineering, 2005, 33(10), 1394-1404.

44.   Sun, W., Starly, B., Nam, J. and Darling, A., “Bio-CAD Modeling and Its Application in Computer-Aided Tissue Engineering”, Computer-Aided Design, 2005, 37(11), 1097-1114.

45.   Wettergreen, M., Bucklen, B., Starly, B., Yuksel, E., Sun, W. and Liebschner, M., “Creation of a Unit Block Library of Architectures for Use in Assembled Scaffold Engineering”, Computer-Aided Design, 2005, 37(11), 1141-1149.

46.   Starly, B., Fang, Z., Sun, W. and Regli, W., “Three-Dimensional Reconstruction for Medical-CAD Modeling”, J. of Computer-Aided Design and Application, 2005, 2(1-4), 431-438.

47.   Fang, Z., Starly, B., Sun, W. and Regli, W., “A Computer-Aided Multi-scale Modeling and Direct Fabrication of Bone Structure”, J. of Computer-Aided Design and Application, 2005, 2(5), 627-634.

48.   Darling, A. and Sun, W., “Freeform Fabrication and Micro-CT Characterization of Poly-ε-Caprolactone Tissue Scaffolds,” IEEE Engineering in Medicine and Biology Magazine, 2005, 24, 78-83.

49.   Khalil, S., Nam, J. and Sun, W., “Multi-nozzle Deposition for Construction of 3D Biopolymer Tissue Scaffolds,” Rapid Prototyping Journal, 2005, 11(1), 9-17.

50.   Starly, B. Lau, A., Sun, W. Lau, W. and Bradbury T., “Direct Slicing of STEP Based NURBS Models for Layered Manufacturing,” Computer-Aided Design, 2005, 37(4), 387-397.

51.   Schroeder, C., Regli, W., Shokoufandeh, A. and Sun, W., “Computer-Aided Design of Porous Artifacts,” Computer-Aided Design, 2005, 37, 339-353.

52.   Fang, Z., Satrly, B. and Sun, W., “Computer-Aided Characterization of Effective Mechanical Properties for Porous Tissue Scaffolds,” Computer-Aided Design, 2005, 37(1), 65-72.

53.   Sun, W., Jiang, T. and Lin, F., “A processing algorithm for freeform fabrication of heterogeneous structures,” Rapid Prototyping Journal, 2004, 10(5), 316-326.

54.   Fang, Z., Sun, W. and Tzeng, J., “Asymptotic Homogenization and Finite Element Implementation for Electromagnetic Composite Conductor,” Journal of Composite Materials, 2004, 38, 1371-1385.

55.   Darling, A. and Sun, W., “3D Microtomographic Characterization of Precision Extruded Poly-ε-Caprolactone Tissue Scaffolds,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2004, 70B(2), 311-317.

56.   Nam, J., Starly, B., Darling, A. and Sun, W., “Computer Aided Tissue Engineering for Modeling and Design of Novel Tissue Scaffolds” Journal of Computer-Aided Design and Application, 2004, 1(1-4), 633-640.

57.   Lal, P. and Sun, W., “Computer Modeling Approach for Microsphere-packed Bone Graft,” Computer-Aided Design, 2004, 36, 487-497.

58.   Wang, F., Shor, L., Darling, A., Khalil, S., Sun, W., Güçeri, S. and Lau, A., “Precision Extruding Deposition and Characterization of Cellualr Poly-e-Caprolactone Tissue Scaffolds,” Rapid Prototyping Journal, 2004, 10(1), 42-49.

59.   Sun, W., Darling, A., Starly, B. and Nam, J., “Computer-Aided Tissue Engineering: Overview, Scope and Challenges”, J. of Biotechnology and Applied Biochemistry, 2004, 39(1), 29-47.

60.   Sun, W., Starly B, Darling, A. and Gomez, C., “Computer-Aided Tissue Engineering: Biomimetic modeling and design of tissue scaffolds”, J. of Biotechnology and Applied Biochemistry, 2004, 39(1), 49-58.

61.   Regli, W., Bespalov, D., Shokoufandeh, A. and Sun, W., “Scale-space Representation and Classification of 3D Models”, ASME/ACM Transactions, Journal of Computer and Information Science in Engineering, 2003, 3(4), 315-324.

62.   Sun, W. and Tzeng, J., “Homogenization Modeling and Effective Mechanical Constants for EM Composite Conductor with Cooling Channel,” J. of Composite Materials, 2003, 27, 147-162.

63.   Sun, W. and Lal, P., “Recent Development on Computer-Aided Tissue Engineering – A Review,” Journal of Computer Methods and Programs in Biomedicine, 2002, 67(2), 85-103.

64.   Sun, W. and Lau, A.C.W. “Three-Dimensional Constitutive Model for Anisotropic Inelastic Deformation of Unidirectional Reinforced Composites” Journal of Thermoplastic Composite Materials, 2002, 15, 477-496.

65.   Sun, W. and Tzeng, J., “Effective Mechanical Properties of EM Composite Conductors: analytical and finite element modeling,” J. of Composite Structures, 2002, 58, 411-421.

66.   Sun, W., Dcosta, D., Lin, F. and El-Raghy, T. " Freeform Fabrication of Ti3SiC2 Powder-Based Structures: Part I – Integrated Fabrication Process," Journal of Materials Processing Technology, 2002, 127, 343-351.

67.   Dcosta, D., Sun, W., Lin, F. and El-Raghy, T, " Freeform Fabrication of Ti3SiC2 Powder-Based Structures: Part II – Characterization and Microstructure Evaluation," Journal of Materials Processing Technology, 2002, 127, 352-360.

68.   Sun, W. and Hu, X., “Reasoning Boolean Operation Based CAD Modeling for Heterogeneous Objects,” Computer Aided Design, 2002, 34, 481-488.

69.   Hu, X. and Sun, W., “A Unit Cell-Based Design Support System for Composite Structures,” Journal of Composite Structures, 2002, 55, 261-268.

70.   Lin, F. and Sun, W., “Warping Analysis in Laminated Object Manufacturing Process,” Journal of Manufacturing Science & Engineering, 2001, 123(4), 739-746.

71.   Sun, W. and Lin, F., “Computer Modeling and Finite Element Simulation of Composite Single Fiber Pull-out,” Journal of Thermoplastic Composite Materials, 2001, 14(4), 327-343.

72.   Lin, F., Sun, W. and Yan, Y., “A Decomposition-Accumulation Model for Layered Manufacturing Fabrication,” Journal of Rapid Prototyping, 2001, 7(1), 24-31.

73.   Lin, F., Sun, W. and Yan, Y., “Optimization with Minimum Process Error for Layered Manufacturing Fabrication,” Journal of Rapid Prototyping, 2001, 7(2), 73-81.

74.   Sun, W., Lin, F. and Hu, X., “Computer-Aided Design and Modeling of Composite Unit Cells,” Journal of Composite Science and Technology, 2001, 61, 289-299.

75.   Regli, W., Hu, X., Atwood, M. and Sun, W., “Design Rationale Systems: State-of-the-Art and Research Trends,” Engineering with Computers: An International Journal for Simulation-Based Engineering, 2000 16(3-4), 209-235.

76.   Sun, W., “Multi-volume CAD Modeling for Heterogeneous Object Design and Fabrication,” Journal of Computer Science and Technology, 2000, 15(1), 27-36.

77.   Sun, W., "Effect of Interlaminar Adhesive on the Yielding Behavior of Aluminum/Fiber- Reinforced Thermoplastic Composite Laminates," J. of Thermoplastic Composite Materials, 1997, 10, 124 – 135.

78.   Sun, W., "Effect of Pre-strain on Nonlinear Deformation Behavior of Reinforced Polymer/Aluminum Laminates," J. of Thermoplastic Composite Materials, 1994, 7, 113-124.

79.   Sun, W., Khatri, S., Lau, A.C.W. and Koczak, M.J., "Nonlinear Material Modeling and Experimental Characterization of Graphite/PPS and Glass/PPS Thermoplastic Matrix Composites," J. of Thermoplastic Composite Materials, 1992, 5, 166-180.

c. Conference papers and abstracts

  1. Zhao, Y., Ouyang, L., Ding, H., Cai, D., Zhang, T. and Sun, W., “Engineering in vitro 3D tumor model using cell-assembling technology”, TERMIS-AP 2013 Shanghai and Wuzhen, China, Oct. 13-15, 2013.
  2. Zhao, L., Chang, K., Lin, F. and Sun, W., “Controlled micro-droplet deposition and application for cell printing”, TERMIS-AP 2013 Shanghai and Wuzhen, China, Oct. 13-15, 2013.
  3. Yan, K., Paluch, K., Nair, K. and Sun, W., “Modeling and Analysis of Bio-prinitng Process-induced Local Environment for Cells”, China Mechanics Annual Conference, Symposium of Cell Biomechanics, Xian, August 19-21, 2013.
  4. Snyder, J., Son, A. and Sun, W., “Packaging Multiple Cell Types by Cell Printing with a Microfluidic Printhead”, 24th Annual International SFF Symposium, Austin, Texas, USA, August 5-7, 2013.
  5. Hamid, Q., Wang, C. and Sun, W., “An Additive Photolithographic System for Fabrication of Microfluidics”, 24th Annual International SFF Symposium, Austin, Texas, USA, August 5-7, 2013.
  6. Hamid, Q., Wang, C., Zhao, Y., Snyder, J. and Sun, W., “Surface Treatment of SU-8 for the Development of Biological Microfluidics”, 2013 Advances in Microfluidics & Nanofluidics meeting, University of Notre Dame, Indiana, USA, 24-26 May 2013.
  7. Li, Y., Zhang, L., Liu, CY, Lin, F. and Sun, W., “A novel 3-D directly controlled cell assembling system for cell constructs”, Proceedings of International Conference on Advanced manufacturing and Manufacturing Process, Dec. 22-24, 2012, Beihai, Guangxi, China.
  8. Ouyang, L. and Sun, W., “Construction of soft tissue in vitro and its characterization of mechanical properties”, 2012 International Conference on Biofabrication-BF2012, Manchester, UK, 28-31 October 2012.
  9. Hamid, Q., Zhao, Y. and Sun, W., “An Interconnected Mircofluidic Tissue Array for Pharmaceutical Investigations”, 2012 International Conference on Biofabrication-BF2012, Manchester, UK, 28-31 October 2012.
  10. Lin, MF, Zhang, T., Sun, W., Xing, Z., “Fabrication and assembling of hydrogel fibers into 3D bunchy constructs for engineering cardiac tissue”, the 3rd TERMIS World Congress, Sept. 5-8, 2012, Vienna, Austria: Journal of Tissue Engineering and Regenerative Medicine, 2012, 6(Sup. 1), 384, Sep. 2012.
  11. Hamid, Q. and Sun, W., “Fabrication Of Micro Organs And Biosensors Using A Digital Micro-mirroring Microfabrication System”, 2012 International Symposium on Flexible Automation, St. Louis, MO, USA, June 18-20, 2012.
  12. Snyder, J., Hunger, P., Wang, C., Wegst, U. and Sun, W., “Controlled porosity of ceramic scaffold by directional freeze casting and scaffold printing”, Proceedings of 2012 International Symposium on Flexible Automation, St. Louis, MO, USA, June 18-20, 2012.
  13. Wang, C., Hamid, Q., Ayan, H. and Sun, W., “A Novel Automation System for Microplasma Surface Patterning and Biologics Printing”, Proceedings of 2012 International Symposium on Flexible Automation, St. Louis, MO, USA, June 18-20, 2012.
  14. Lin, MF., Zhang, T., Sun, W. and Xiong, Z., “Hydrogel fibers based modular approach for fabrication of vascularized bunchy constructs”, Proceedings of the 9th World Biomaterials Congress, June 1-5, 2012, Chengdu, China.
  15. Zhang, LQ., Zhang, T., Sun, W., Lin, F. and Xiong, Z., “Enhanced hydrophilicity of PLGA/TCP scaffold by novel low-temperature deposition nozzle with collagen”, Proceedings of the 9th World Biomaterials Congress, June 1-5, 2012, Chengdu, China.
  16. Zhao, Yu, Zhang T., Lin, F. and Sun, W., “Controlled cell assembly for 3D tumor model – a preliminary study”, Proceedings of the 9th World Biomaterials Congress, June 1-5, 2012, Chengdu, China.
  17. Zhang, L., Cao, Y., Zhao, L., Lin, F. and Sun, W., “Precise Cell Printing Based on Digital Micro-injection”, Proceedings of the 9th World Biomaterials Congress, June 1-5, 2012, Chengdu, China.
  18. Li, Y., Zhang, L. and Sun, W., “A Four-nozzle Multi-cell Assembling Machine”, Proceedings of the 9th World Biomaterials Congress, June 1-5, 2012, Chengdu, China.
  19. Ayan, H., Yildirim, E., Pappas, D. and Sun, W., “Freeform Maskless Biopolymer Patterning and Biologics Printing for Tissue Engineering Applications”, Proceedings of the 9th World Biomaterials Congress, June 1-5, 2012, Chengdu, China.

20.        Hamid, Q. and Sun, W., “A Digital Micro-Mirror -Based Biofabrication of Cell-laden Micro-fluidic Device”, Proceedings of the 9th World Biomaterials Congress, June 1-5, 2012, Chengdu, China.

  1. Snyder, J., Hunger, P., Wang, C., Meyers, N., Wegst, U. and Sun, W., “Hierarchical Porous Ceramic Scaffolds by Freeze Casting Fabrication Method”, Proceedings of the 9th World Biomaterials Congress, June 1-5, 2012, Chengdu, China.
  2. Wang, C., Hamid, Q., Ayan, H. and Sun, W., “Dual Functional Platform for Microplasma Surface Patterning and Biologics Printing”, Proceedings of the 9th World Biomaterials Congress, June 1-5, 2012, Chengdu, China.
  3. Snyder, J., Hunger, P., Wang, C., Meyers, N., Wegst, U. and Sun, W., “Hierarchical Porous Ceramic Scaffolds by Freeze Casting Fabrication Method”, 9th World Biomaterials Congress, Chengdu, China, June 1-5, 2012.
  4. Hamid, Q. and Sun, W., “A Digital Micro-mirror Device-Based System for the Biofabrication of Cancer Tissue Models”, 9th World Biomaterials Congress, Chengdu, China, June 1-5, 2012.
  5. Zhao, Y., Zhang, T., Lin, F., Snyder, J. Hamid, Q., Wang, C. and Sun, W., “Bioprinting 3D In-Vitro Model for Tissue Science and Engineering”, Predictive Functional Human Tissue Models Conference, Boston, MA, USA, November 17-18, 2011.
  6. Sun, W., “From Tissue Engineering to Tissue Science and Engineering - A new paradigm for Biofabrication”, 2011 International Conference of Biofabrication, Toyama, Japan, October 6-8, 2011.
  7. Hamid, Q., Wang, C., Ayan, H. and Sun, W., “Dual functional freeform microplasma surface patterning and biologics printing”, 2011 International Solid Freeform Fabrication Symposium, Austin, TX, USA, August 6-8, 2011.
  8. Snyder, J., Wang, C., Hamid, Q. and Sun, W., “Combined SFF Patterning and Replica Molding for Microfabrication of Cell-Laden Microfluidic Device”, 2011 International Solid Freeform Fabrication Symposium, Austin, TX, USA, August 6-8, 2011.
  9. Zhang, T, Zhang, L., Zhang, R., Lin,F., Hamid, Q., Snyder, J., Wang, C. and Sun, W., “Cell printing for 3D tissues”, TERMIS EU2011, Granada, Spain, June 7-10, 2011.
  10. Sun, W., “Advances on Bio-Additive Manufacturing”, China 5th Rapid Prototyping Conference, Xian, China, May 16-17, 2011.
  11. Snyder, J., Du, B., Zhang, Y. Emami, K., Wu, H. and Sun, W., “Kinetics of in vitro drug metabolism in human hepatic cells cultured in a rotating bioreactor”, 18th IAA Humans in Space Symposium, Houston, TX, USA, April 11-15, 2011.
  12. Sun, W., “Biofabrication of Biomaterials for Tissue Science and Engineering”, 3rd China-Europe Symposium on Biomaterials in Regenerative Medicine (CESB2011), Nanjing, China, April 6-8, 2011.
  13. Snyder, J., Hamid, Q., Wang, C., Xu,, M., Nah-Cederquist, HD and Sun, W., “Process-Induced Mechanosensation of Stem Cell during Printing”, 2011 Translational Regenerative Medicine Forum, Washington, DC, USA, April 6-8, 2011.
  14. Sun, W., Liebschner, M., “Integrated Design/Manufacturing in Musculoskeletal Tissue Engineering Scaffolds:, ORS 2011 Annual Meeting in Long Beach, California, USA, January 13-16, 2011.
  15. Sun, W., Barbee, K. and Marcolongor, M., “Study Bio-Deposition Induced Effect on Living Cells”, 2011 NSF CMMI Research and Innovation Conference, Atlanta, GA, USA, January 4-7, 2011.
  16. Sun, W., and Ayan, H., “A dual functional freeform microplasma surface patterning and biologics printing”, 2011 NSF CMMI Research and Innovation Conference, Atlanta, GA, USA, January 4-7, 2011
  17. Ayan, H., Yildirim, E., Pappas, D. and Sun, W., “Freeform Maskless Cell Patterning with 3D Motion System for Tissue Engineering Applications”, TERMIS NA 2010 Conference and Exposition, Orlando, Florida, USA, December 5-8, 2010.
  18. Snyder, J. and Sun, W., “Bi-additive process for cell printing”, TERMIS NA 2010 Conference and Exposition, Orlando, Florida, USA, December 5-8, 2010.
  19. Yan, K., McMullin, E. and Sun, W., “Modeling of Poly-ε-caprolactone Scaffold Degradation”, ASME 2010 International Mechanical Engineering Congress & Exposition, Vancouver, Canada, Nov. 12-18, 2010.
  20. Snyder, J., Sun, Y., Nah-Cederquist HD, Xu., M. and Sun, W., “Mesenchymal Stem Cell Printing and Possible Phenotype Reprogramming”, 2010 International Conference on Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010
  21. Snyder, J., Chang, R., Culbertson, C., Emami, K., Hu, H. and Sun, W., “Novel Temperature Controlled Printing System and Microfluidic Chip Coupled for In Vitro Radiation Study”, 2010 International Conference on Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010.
  22. Hamid, Q., Wang, C., Timmer, M., Hammer, J., Guceri, S. and Sun, W., “Feasibility and Fabrication of Three-dimensional Scaffold”, 2010 International Conference on Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010.
  23. Hamid, Q., Wang, C., Guceri, S. and Sun, W., “Gelatin Nanofibers with Encapsulated Cells Assembled by Coaxial Electrospinning”, 2010 International Conference on Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010.
  24. Kalidindi, A., Cederquist, A., Snyder, J., Hamid, Q., Yildirim, E. and Sun, W., “Establishing Optimal Bioprinting Process Parameters for Human Mesenchymal Stem Cell Viability”, 2010 International Conference on Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010.
  25. Yan, K., McMullin, E., Wang, C. and Sun, W., “Study of Design Parameter and Environmental Effects on Biopolymer Scaffold Degradation”, 2010 International Conference on Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010.
  26. Ayan, H., Yildirim, E., Pappas, D. and Sun, W., “Freeform Maskless Cell and Biomolecule Patterning for Tissue Engineering Applications”, 2010 International Conference on Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010.
  27. Yildirim, E., Pappas, D., Guceri, S. and Sun, W., “Combined Effect of Plasma and Protein Surface Functionalization of Polycaprolactone Tissue Scaffolds on Cellular Functions”, 2010 International Conference on Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010
  28. Xu, M., Ge, K., Guo, M., Snyder, J and Sun, W., “Screening drug candidates for metabolic syndrome by an cell-assembly technique derived 3-D model”, 2010 International Conference on Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010.
  29. Snyder, J. and Sun, W., “Bioprinting Cells and Injury Analysis”, 2010 International Workshop on Cell Mechanics and Bioengineering”, Xian,China, August 20-22, 2010.
  30. Sun, W., “Biomanufacturing for Tissue Science and Engineering: a new paradigm for modern design and manufacturing”, 2010 International Conference on Frontiers Design and Manufacturing”, Changsha, China, July 17-19, 2010.
  31. Snyder, J. and Sun, W., “Bio-additive Manufacturing for Cell Printing”, International Solid Freeform Fabrication Symposium, Austin, TX, USA, August 9-11, 2010.
  32. Yildirim, E., Ayan, H., Pappas, D., Fridman, A., Sun. W., “Freeform Plasma Generated Maskless Cell Patterning for Tissue Engineering Applications”, International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, CA, USA, April 26-30, 2010
  33. Yildirim, E., Ayan, H., Fridman, A., Sun. W., “Freeform Maskless Nanopatterning for Tissue Engineering Applications”, ASME 2010 First Global Congress on NanoEngineering for Medicine and Biology (NEMB2010), Houston, TX, February 7-10, 2010.
  34. Hamid, Q. and Sun. W., “Co-axial Electrosinning Biopolymer with Living Cells”, ASME 2010 First Global Congress on NanoEngineering for Medicine and Biology (NEMB2010), Houston, TX, February 7-10, 2010.
  35. Sun, W., “Computer-Aided Tissue Engineering”, Proceedings of The Second International Symposium on Computational Mechanics (ISCM II)/ The Twelfth International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science (EPMESC XII), Hong Kong and Macao, Nov. 30-Dec. 3, 2009
  36. Yan, K., Sun, W., Swift, M. and Roros, C., “Effects of Scaffold Design Parameters and Local Environment on Biopolymer Scaffold Degradation”, Proceedings of 2009 ASME IMECE conference, Lake Buena Vista, FL, USA, Nov. 13-19, 2009.
  37. Yan, K., Paulch, K., Nair, K. and Sun, W., “Effects of Process Parameters on Cell Damage in a 3D Alginate Tissue Construct with Cell Encapsulated”, Proceedings of 2009 ASME IMECE conference, Lake Buena Vista, FL, USA, Nov. 13-19, 2009.
  38. Snyder J., Roy, D., Chang, R., Bergenstock, M., Liu, Q. and Sun, W., “Solid Freeform Fabrication for Biomimetic Tissue Constructs”, Proceedings of 2009 ASME IMECE conference, Lake Buena Vista, FL, USA, Nov. 13-19, 2009.
  39. Liu W., Lau, W., Liu Q. and Sun, W., “Solid Freeform Fabrication for Biomimetic Tissue Constructs”, Proceedings of 2009 ASME IMECE conference, Lake Buena Vista, FL, USA, Nov. 13-19, 2009.
  40. Yildirim, E., Ayan, H., Pappas, Bujanda, A., D., Fridman, A., Sun. W., “Patterned Growth of Cells and Biomolecules using a Microplasma Printing System”, AVS 56th International Symposium and Exhibition, San Jose, CA, Nov. 8-13, 2009.
  41. Bergenstock, M., Balaburski, G., Lau, W., Sun, W., Sun, Q. and Liu, Q., “A Novel In Vitro Three-Dimensional Breast Cancer Model Using Polystyrene Scaffolds”, American Association of Cancer Research: Advances In Breast Cancer Research, San Diego, CA, USA, October 13th-16th, 2009.
  42. Bergenstock, M., Balaburski, G., Lau, W., Sun, W., Sun, Q. and Liu, Q., “Polystyrene Scaffolds: A Novel Tool For In Vitro Three-Dimensional Cancer Models”, American Association of Cancer Research: Frontiers in Basic Cancer Research, Boston, MA, USA, October 8th-11th, 2009.
  43. Li, J., Regli, W. and Sun, W., “Virtual Network Design and Physiology Analysis”, Proceedings of 2009 SIAM/ACM Joint Conference on Geometric and Physical Modeling, San Francisco, CA, USA, Oct. 5-8, 2009.
  44. Liu, W., Bergenstock, M., Lau, W., Sun, W., Liu, Q., “Novel Poly-ε-caprolactone (PCL) Scaffolds For Three-Dimensional Stem Cell Differentiation”, New Jersey Stem Cell Symposium, Bridgewater, New Jersey, USA, September 24, 2009.
  45. Starly, B., and Sun, W., “A Graduate Course in Computer Aided Tissue Engineering (CATE) For Engineering Majors”, 2nd World Congress of Tissue Engineering and Regenerative Medicine, Seoul, Korea, Aug. 31 to Sep. 3, 2009
  46. Sun, W., “Biofabrication for Tissue Scienece and Engineering”, 2nd World Congress of Tissue Engineering and Regenerative Medicine, Seoul, Korea, Aug. 31 to Sep. 3, 2009.
  47. Chang, R., Snyder, J., Wu, H. and Sun, W., “Bioprinting Cell-Laden Matrigel Constructs for Multicompartment Tissue Chambers”, 2nd World Congress of Tissue Engineering and Regenerative Medicine, Seoul, Korea, Aug. 31 to Sep. 3, 2009.
  48. Bergenstock, M., Lau, W., Sun, W., Sun, Q., Liu, Q., “Superior 3D In Vitro Tumor Models Using Polystyrene Scaffolds”, 2nd World Congress on Tissue Engineering and Regenerative Medicine, Seoul, Korea, August 30-September 2, 2009.
  49. Liu, W., Bergenstock, M., Lau, W., Sun, W., Liu, Q., “Comparison Of Osteogenic Cell Differentiation Within 2D And 3D Culture Systems”, 2nd World Congress on Tissue Engineering and Regenerative Medicine, Seoul, Korea, August 30-September 2, 2009.
  50. Yildirim, E., Caldwell, R., Fogg, M., Nah. H., and Sun, W., “Medical Image Reconstruction and Solid Freeform Fabrication Assisted Custom Implant Design for Sticker Syndrome Patient”, International Solid Freeform Fabrication Symposium, Austin, TX, USA, August 3-5, 2009.
  51. Shor, L., Guceri, S. and Sun, W., “Freeform Fabrication of Scaffold for Bone Tissue Engineering Applications”, 2009 annual meeting for tissue and cell engineering society TCES2009, Glasgow, UK, July 8-10, 2009.
  52. Sun, W., Shokoufandeh, A. and Liebschner, M., “Computer-Aided Tissue Engineering“, Proceedings of 2009 NSF CMMI Research and Innovation Conference, Honolulu, Hawaii, USA, June 22-25, 2009.
  53. Sun, W., Barbee, K., and Marcolongo, M., “Study Bio-Deposition Induced Effect on Living Cell”, Proceedings of 2009 NSF CMMI Research and Innovation Conference, Honolulu, Hawaii, USA, June 22-25, 2009.
  54. Buyukhatipoglu, K., Chang, R., Sun, W. and Clyne A., “Bioprinted Nanoparticles for Tissue Engineering Applications”, Proceedings of the ASME 2009 Summer Bioengineering Conference (SBC2009), Resort at Squaw Creek, Lake Tahoe, CA, USA, June 17-21, 2009.
  55. Yildirim, E., Bsunder, R., Bently, L., Allen, F., Guceri, S. and Sun, W., “A Combinatorial Effect of  Protein Coating and Plasma Modification on Osteoblast Differentiation of (for) Polycaprolactone Scaffolds”, TERMIS-North America 2008 Conference and Exposition, San Diego, CA, USA, Dec. 6-10, 2008.
  56. Chang, R., Qing, L., Liu, W. and Sun, W., “3D Scaffolds for Enhanced Cell Culture and Tissue Engineering Applications”, TERMIS-North America 2008 Conference and Exposition, San Diego, CA, USA, Dec. 6-10, 2008.
  57. Liu, W., Lau, W., Liu, Q. and Sun, W., “Comparison of osteogenesis of osteogenic cells within 2D and 3D Culture Systems”, the 48th Annual Meeting of American Society for Cell Biology, San Francisco, CA, USA, December 13-17, 2008.
  58. Chang, R., W., Lau, W., Liu, Q. and Sun, W., “3D Cell Culture for Enhancement of Cell Function”, the 48th Annual Meeting of American Society for Cell Biology, San Francisco, CA, USA, December 13-17, 2008.
  59. Chang, R., Liu, Q., Lau, W. and Sun, W., “3D Scaffolds to Biomimic Physiological Microenvironment for Cell Culture and Tissue Regeneration,” the 1st World Congress of Regenerative Medicine and Stem Cell, Guang Zhou, China, December 3-5, 2008.
  60. Chang, R., Liu, Q., Lau, W. and Sun, W., “Biomanufacturing for Tissue Science and Engineering”, the 2nd International Conference of Biomanufacturing, Beijing, China, November 6-8, 2008.
  61. Yan, K., Nair, K. and Sun, W., “A Multi-scale Modeling Based Theory for Mechanical Load Induced Cell Damage in a 3D Cell-Encapsulated Alginate Tissue Construct,” 2008 ASME International Mechanical Engineering Congress & Exposition, Boston, MA, USA, October 31-November 6, 2008.
  62. Nair, K., Gandhi, M., Marcolongo, M., Barbee, K. and Sun, W., “Characterization of Cell Injury Induced by Bioprinting,” the 13th International Biotechnology Symposium & Exhibition (IBS-2008), Dalian, China, Oct. 12-17, 2008.
  63. Chang, R., Nam, J., Jeevarajan, A., Wu, H. and Sun, W., “Direct Cell Writing of 3D Tissue Micro-organs for Drug Metabolism Study,” the 13th International Biotechnology Symposium & Exhibition (IBS-2008), Dalian, China, Oct. 12-17, 2008.
  64. Yildirim, E., Guceri, S. and Sun, W., “Enhanced Osteoblast Function on Bone Tissue Engineerign Scaffolds by Plasma Modification,” the 13th International Biotechnology Symposium & Exhibition (IBS-2008), Dalian, China, Oct. 12-17, 2008.
  65. Chang, R., Sun, W., K. Emami, A. Jeevarajan and H. Wu, “Bioprinting for Freeform Fabrication of Micro-Organ Tissue Analog for Drug Metabolism Study”, 19th Solid Freeform Fabrication Symposium, Austin, TX, USA, August 4-6, 2008.
  66. Chang, R., Sun, W., Emami, K., Jeevarajan, A. and Wu, H., “Bioprinting of Micro-Organ Tissue Analog for Drug Metabolism Study”, COSPAR Assembly, Montreal, Canada, July 13-20, 2008.
  67. Nair, K, Yan, C and Sun, W., “Three Dimensional Multi-Scale Modelling of Cell Deformation in Encapsulated Alginate Scaffolds”, 8th World Biomaterials Congress, Amsterdam, Holland, May 28-23, 2008.
  68. Chang, R., Nam, J., Morss-Clyne, A., and Sun, W., “Direct Cell Writing of Cell Encapsulated 3D Liver Tissue Constructs Patterned With Endothelial Cells”, 8th World Biomaterials Congress, Amsterdam, Holland, May 28-23, 2008.
  69. Yildirim, E., D., Robyn Besunder, Lauren Bentley, Halim Ayan, Alexander Fridman, Fred Allen, Wei Sun, “Concurrent Effect of Oxygen-based Plasma Polymerization and Fibronectin Coating of Poly e-caprolactone Surface on Osteoblast Cell Attachment and Proliferation,” 8th World Biomaterials Congress, Amsterdam, Holland, May 28-23, 2008.
  70. Sun, W., Shokoufandeh, A. and Liberschner, M., “Computer-Aided Tissue Engineering”, Proceedings of 2006 NSF Design, Service, and Manufacturing Grantees and Research Conference, Knoxville, TN, January 6-9, 2008.
  71. Holtorf  H. Leslie J. Chang R, Nam J, Culbertson C, Sun W, Gonda S, “Development of a Three-Dimensional Tissue-on-a-Chip Micro-Organ Device for Pharmacokinetic Analysis”, the 47th Annual Meeting of the American Society for Cell Biology, Washington, DC, December 1-5, 2007.
  72. Chang, R., Nam, J., Holtorf, H, Jeevarajan, A., Gonda, S., Culbertson, C. and Sun, W., “Biofabrication of liver tissue constructs on a MIcrofluidic platform for pharmacokinetic study”, Proceedings of the International Manufacturing Science and Engineering 2007, Atlanta, Georgia, USA., October 15-18, 2007.
  73. Yildirim, E., Güçeri, S. and Sun, W., “Effect of Oxygen-Radio Frequency Plasma Treatment on Three-Dimensional Poly (e-Caprolactone) Scaffolds”, Proceedings of the International Manufacturing Science and Engineering 2007, Atlanta, Georgia, USA., October 15-18, 2007.
  74. Shor, L., Güçeri, S. and Sun, W., “Polycaprolatctone/Hydroxyapatite Scaffolds for Tissue Engineering”, Proceedings of the International Manufacturing Science and Engineering 2007, Atlanta, Georgia, USA., October 15-18, 2007.
  75. Nam, J., Chang, R. and Sun, W., “Solid freeform fabrication based bioprinting for tissue-on-a-chip systems”, Invited paper for 18th Solid Freeform Fabrication Symposium, Austin, TX, USA, August 5-8, 2007.
  76. Nair, K., Yan, K. and Sun, W., “Quantitative Modeling and Characterization of Hydrogel based 3D Tissue Scaffolds”, 2007 Flexible Automation & Intelligent Manufacturing International Conference (FAIM2007), Philadelphia, PA, USA, June 16-18, 2007.
  77. Yildirim, E., Yin, X., Guceri, S. and Sun, W., “Three Dimensional Composite Alginate/Carbon Nanotube Tissue Scaffolds Printed via Multi-Nozzle Deposition System”, 2007 Flexible Automation & Intelligent Manufacturing International Conference (FAIM2007), Philadelphia, PA, USA, June 16-18, 2007.
  78. Vondran, J., Sun, W. and Schauer, C., “Electrospanning Nanofiber for Tissue Scaffolds”, 2007 Flexible Automation & Intelligent Manufacturing International Conference (FAIM2007), Philadelphia, PA, USA, June 16-18, 2007.
  79. Chang, R., Jae, N. and Sun, W., “Freeform Bio-deposition of Hepatocellular Tissue Constructs as an In Vitro Physiological Model”, 2007 Flexible Automation & Intelligent Manufacturing International Conference (FAIM2007), Philadelphia, PA, USA, June 16-18, 2007.
  80. Gomez, C., Shokoufandeh, A. and Sun, W., “A Volumetric Steiner Tree Based Design Approach for 3D Tissue Scaffolds”, TERMIS North America 2007 Conference and Exposition, Westin Harbour Castle, Toronto, Canada, June 13-16, 2007.
  81. Chang, R., Nam, J., Culbertson C., Holtorf, H., Jeevarajan, A. and Sun, W., “Bio-printing and Modeling of Flow Patterns for Cell Encapsulated 3D Liver Chambers For Pharmacokinetic Study”, TERMIS North America 2007 Conference and Exposition, Westin Harbour Castle, Toronto, Canada, June 13-16, 2007.
  82. Shor, L., Guceri, S., Wen, X. and Sun, W., “Osteoblast Response to Composite Polycaprolactone/Hydroxyapatite Tissue Scaffolds”, TERMIS North America 2007 Conference and Exposition, Westin Harbour Castle, Toronto, Canada, June 13-16, 2007.
  83. Nair, K., Yan, K. and Sun, W., “Multi-scale Computational Modeling and Characterization of Cell Encapsulated Alginate Tissue Constructs”, TERMIS North America 2007 Conference and Exposition, Westin Harbour Castle, Toronto, Canada, June 13-16, 2007.
  84. Yildirim, E., Ayan, H., Vasilets, V., Fridman, F., Guceri, S. and Sun, W., “Enhancement of Early-Time Points Osteoblastic Adhesion on Poly (e-Caprolactone) Scaffolds through Surface Plasma Treatment”, TERMIS North America 2007 Conference and Exposition, Westin Harbour Castle, Toronto, Canada, June 13-16, 2007.
  85. Li, J., Regli, W. and Sun, W., “A Mathematical Modeling for Representation of Physiological Vascular Network Integrated with Tissue Scaffolds”, TERMIS North America 2007 Conference and Exposition, Westin Harbour Castle, Toronto, Canada, June 13-16, 2007.
  86. Li, J., Regli, W. and Sun, W., “Mathematical Representation of the Vascular Structure and Applications”, 2007 ACM Symposium on Solid and Physical Modeling, Beijing, China, June 4-6, 2007.
  87. Nair, K., Yan, K. and Sun, W., “A Multi Level Computational Modeling for Quantifying Cell Deformation in Encapsulated Alginate Structures”, CompMed 2007, Montreal, Quebec, Canada, May 16-18, 2007.
  88. Vondran, J., Sun, W. and Schauer, C., “Mechanical Property Optimization of Electrospun Chitosan-PEO Nanofibers”, American Chemical Society Middle Atlantic Regional Meeting, Collegeville, PA, USA, May 16-18, 2007.
  89. Karande, T, Sun, W, Dean, D. and Agrawal, M., “Effect of Scaffold Architecture and Time on Cell Viability in the Interior of Tissue Engineering Construct”, Society For Biomaterials (SFB) - 2007 Annual Meeting, Chicago, IL, USA, April 18-21, 2007.
  90. Chang, R., Nam, J., Culbertson C., Holtorf, H., Jeevarajan, A. and Sun, W ., “Computer-Aided Freeform Bioprinting of 3D Tissue Constructs for Pharmacokinetic Study”,  the 3rd International Symposium on Bioprinting and Biofabrication 2006, Kawasaki, Japan, November 21-22, 2006.
  91. Vondran, J., Sun, W. and Schauer, C., “Preparation of Electrospun Chitosan-PEO Nanofibers”, Biomedical Engineering Society 2006 Annual Meeting, Chicago, IL, USA, October 11-13, 2006.
  92. Karande, T, Sun, W, Dean, D. and Agrawal, M., “Evaluating Osteoblast Viability as a Function of Depth in Tissue Engineering Constructs”, Biomedical Engineering Society 2006 Annual Meeting, Chicago, IL, USA, October 11-13, 2006.
  93. Starly, B., Chang, R. and Sun, W., “Fabrication of Poly-Ethylene Glycol Hydrogels Encapsulated with Hepatocytes using UV-Photolithography”, Proceedings of 17th Solid Freeform Fabrication Symposium, Austin, TX, USA, August 14-16, 2006.
  94. Shor, L., Guceri, S. and Sun, W., “Precision Extrusion Deposition of Composite Scaffolds”, Proceedings of 17th Solid Freeform Fabrication Symposium, Austin, TX, USA, Aug. 14-16, 2006.
  95. Yildirim, E., Yin, X., Guceri, S. and Sun, W., “Multi-Nozzle Deposition for Three Dimensional Printing of Composite Alginate/Carbon Nanotube Tissue Scaffolds”, Proceedings of 17th Solid Freeform Fabrication Symposium, Austin, TX, USA, Aug. 14-16, 2006.
  96. Gomez, C., Starly, B., Shokoufandeh, A. and Sun, W., “Transferring Optimized Unit Cell Based Tissue Scaffold Designs to a Freeform Fabrication System”, Proceedings of 17th Solid Freeform Fabrication Symposium, Austin, TX, USA, August 14-16, 2006.
  97. Chang, R., Starly, B. and Sun, W., “Freeform Bioprinting of Liver Encapsulated in Alginate Hydrogels Tissue Constructs for Pharmacokinetic Study”, Proceedings of 17th Solid Freeform Fabrication Symposium, Austin, TX, USA, August 14-16, 2006.
  98. Sun, W., Shokoufandeh, A. and Liberschner, M., “Computer-Aided Tissue Engineering”, Proceedings of 2006 NSF Design, Service, and Manufacturing Grantees and Research Conference, St. Louis, Missouri, July 24-27, 2006.
  99. Nair, K. and Sun, W., “Characterization and Numerical Modeling of Alginate based Cell Encapsulated Matrices”, Proceedings of World Congress on Tissue Engineering and Regenerative Medicine, Pittsburgh, PA, USA, April 24-27, 2006.
  100. Starly, B., Chang, R., Sun, W., Culbertson, C., Holtorf, H. and Gonda, S., “Bioprinted Tissue-on-chip Application for Pharmacokinetic Studies”, Proceedings of World Congress on Tissue Engineering and Regenerative Medicine, Pittsburgh, PA, USA, April 24-27, 2006.
  101. Yildirim, E., Yin, X., Guceri, S., Ko, F. and Sun, W., “Process and Cytocompatibility of 3D Hybrid Alginate/Carbon Nanotube Tissue Scaffolds”, Proceedings of World Congress on Tissue Engineering and Regenerative Medicine, Pittsburgh, PA, USA, April 24-27, 2006.
  102. Shor, L., Guceri, S. and Sun, W., “Polycaprolactone and Composite Polycaprolactone/ Hydroxyapatite Scaffolds for Bone Tissue Engineering”, Proceedings of World Congress on Tissue Engineering and Regenerative Medicine, Pittsburgh, PA, USA, April 24-27, 2006.
  103. Zhou, X., Gomez, C., Denton, T., Shokoufandeh, A. and Sun, W., “Data support for unit cell base tissue scaffold design, analysis and manufacture”, Proceedings of 2006 IEEE Northeast Bioengineering Conference, Lafayette College, Easton, PA, April 1-2, 2006.
  104. Gomez, C., Denton, T., Shokoufandeh, A. and Sun, W., “Multi-Parameter Optimization for Two-Phase Unit-Cell based Tissue Scaffolds”, Proceedings of 2006 IEEE Northeast Bioengineering Conference, Lafayette College, Easton, PA, April 1-2, 2006.
  105. Yildirim, E., Yin, X., Ko, F., Guceri, S. and Sun, W, “Evaluation of 3D Hybrid Alginate/Single Wall Carbon Nanotube Tissue Scaffolds in Terms of Process and Cytocompatibility”, Proceedings of 2006 IEEE Northeast Bioengineering Conference, Lafayette College, Easton, PA, April 1-2, 2006.
  106. Shor, L., Gordon, J., An, Y., Güçeri, S. and Sun, W., “Precision Extruding Deposition of Polycaprolactone and Composite Polycaprolactone/Hydroxyapatite Scaffolds for Tissue Engineering”, Proceedings of 2006 IEEE Northeast Bioengineering Conference, Lafayette College, Easton, PA, April 1-2, 2006.
  107. Vondran, J., Rodriguez, M., Schauer, C. and Sun, W., “Preparation of Electrospun Chitosan-PEO Fibers”, Proceedings of 2006 IEEE Northeast Bioengineering Conference, Lafayette College, Easton, PA, April 1-2, 2006.
  108. Evans, P. and Sun, W., “Finite Element Analysis and Computer Aided Tissue Engineering Design of a Replacement Lumbar Intervertebral Disc”, Proceedings of 2006 IEEE Northeast Bioengineering Conference, Lafayette College, Easton, PA, April 1-2, 2006.
  109. Chang, R., Starly, B., Culbertson, C., Holtorf, H., Gonda, S. and Sun, W., “Development of an in vitro Micro-organ Model for Pharmacokinetic Microanalysis”, Proceedings of 2006 IEEE Northeast Bioengineering Conference, Lafayette College, Easton, PA, April 1-2, 2006.
  110. Nair, K. and Sun, W., “Numerical Model for Predicting Mechanical Properties of Cell Encapsulated Hydrogel Scaffolds”, Proceedings of 2006 IEEE Northeast Bioengineering Conference, Lafayette College, Easton, PA, April 1-2, 2006.
  111. Evans, P. and Sun, W., “Novel Design on an Intervertebral Disc Replacement Utilizing Finite Element Methods”, Proceedings of 14th Annual Symposium on Computational Methods in Orthopaedic Biomechanics, Chicago, IL, March 18, 2006.
  112. Khalil, S. and Sun, W., “Bioactive Fabrication of Tissue Engineered Sacffolds”, Proceedings of Advances in Bio-Manufacturing, ASME IMECE 2005, Orlando, FL, November 5-11, 2005.
  113. Starly, B., Shor, L., Guceri, S. and Sun, W., “Space Filling Curves: Its Design and Fabrication for Extrusion Based SFF Systems”, Proceedings of Advances in Bio-Manufacturing, ASME IMECE 2005, Orlando, FL, November 5-11, 2005.
  114. Wettergreen, M., Bucklen B., Starly B., Yuksel E., Sun W. and Liebschner, M., "Unit Block Library of Basic Architectures for Use in Computer-Aided Tissue Engineering of Bone Replacement Scaffolds." Proceedings of Advances in Bio-Manufacturing, ASME IMECE 2005, Orlando, FL, November 5-11, 2005.
  115. Wettergreen, M., Bucklen B., Sun W. and Liebschner, M., "Computer-Aided Tissue Engineering in Whole Bone Replacement Treatment." Proceedings of Advances in Bio-Manufacturing, ASME IMECE 2005, Orlando, FL, November 5-11, 2005.
  116. Williams, R., Huang, Y, Melkote, S., Kinsey, B., Sun, W. and Yao, D., “Recent Advances in Micro/Meso-Scale Manufacturing Process”, Proceedings of IMECE2005, 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida USA, November 5-11, 2005.
  117. Dutta, D., Stone, J., Sun, W., Cho, E., Lockett, S., Wang, F. and Henderson, L., “Osteoblast Adhesion on Tissue Engineering Scaffolds Made by Bio-Manufacturing Techniques”, Proceedings of IMECE2005 (ASME-IMECE2005-82472), 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida USA, November 5-11, 2005.
  118. Sun, W., “Computer-Aided Tissue Engineering”, Proceedings of World Congress on Tissue Engineering and Regenerative Medicine, Shanghai, China, Oct. 20-25, 2005.
  119. Sun, W., “Biopolymer Deposition for Freeform Fabrication of Hydrogel Tissue Constructs”, Proceedings of MS&T '05 ASM International Conference, Pittsburgh, PA, USA, September 25-28, 2005.
  120. Sun, W., “Freeform Fabrication of 3D Tissue Scaffolds”, Proceedings of MS&T '05 ASM International Conference, Pittsburgh, PA, USA, September 25-28, 2005.
  121. Li, J., Regli, W. and Sun, W., “Swept Volume Representation of Material Deposition Process for Tissue Scaffold Fabrication”, Proceedings of ASME 2005 Design Engineering Technical Conference, Long Beach, California, USA, September 24-28, 2005.
  122. Sun, W., “Computer-Aided Tissue Engineering and Its Application For Freeform Fabrication of Tissue Substitutes”, Proceedings of DigiFab 2005 - the International Conference on Digital Fabrication, Baltimore, MD, USA, September 19, 2005.
  123. Fang, Z., Sun, W. and Tzeng, J., “A Homogenization Theory for Composites with Time-Dependent Elastic-Viscoplastic Behavior”, the 20th American Society of Composites Technical Conference, Philadelphia, PA, USA, September 7-9, 2005.
  124. Li, J., Regli, W. and Sun, W., “A Case Study of Swept Volume Representation of Tissue Scaffolds”, Proceedings of 2005 IEEE Northeastern Bioengineering Conference, Stevens Institute of Technology,  New Jersey, USA, April 2-3, 2005.
  125. Demirci, M., Gomez, C., Shokoufandeh, A. and Sun, W., “Connectivity for Mass and Fluid Transport in Three-Dimensional Two-Phase Structures”, Proceedings of 2005 IEEE Northeastern Bioengineering Conference, Stevens Institute of Technology,  New Jersey, USA, April 2-3, 2005.
  126. Gomez, C., Demirci,, M., Sun, W. and Shokoufandeh, A., “Unit Cell Analysis and Characterization of Three-Dimensional Two-Phase Tissue Scaffolds”, Proceedings of 2005 IEEE Northeastern Bioengineering Conference, Stevens Institute of Technology,  New Jersey, USA, April 2-3, 2005.
  127. Nair, K. and Sun, W., “Preliminary Study of Viscoelastic Bulk Properties for Cell-Substrate Interaction in Scaffold Guided Tissue”, Proceedings of 2005 IEEE Northeastern Bioengineering Conference, Stevens Institute of Technology,  New Jersey, USA, April 2-3, 2005.
  128. Zhou, X., Fang, Z. and Sun, W., “Numerical computation of the homogenized effective tissue scaffold property”, Proceedings of 2005 IEEE Northeastern Bioengineering Conference, Stevens Institute of Technology,  New Jersey, USA, April 2-3, 2005.
  129. Evans, P., Starly, B. and Sun, W., “Computer Aided Tissue Engineering Design for a Spinal Intervertebral Disc”, Proceedings of 2005 IEEE Northeastern Bioengineering Conference, Stevens Institute of Technology,  New Jersey, USA, April 2-3, 2005.
  130. Khalil, K., Nam, J. and Sun, W., “Freeform Fabrication of Bioactive Tissue Scaffolds”, Proceedings of 2005 IEEE Northeastern Bioengineering Conference, Stevens Institute of Technology,  New Jersey, USA, April 2-3, 2005.
  131. Starly, B., Shor, L., Fang, Z. and Sun, W., “Design and Freeform Fabrication of Load Bearing Tissue Scaffolds”, Proceedings of 2005 IEEE Northeastern Bioengineering Conference, Stevens Institute of Technology,  New Jersey, USA, April 2-3, 2005.
  132. Shor, L., Darling, A., Starly, B., Sun, W. and Gureci, S., “Precision Extruding Deposition of Composite Polycaprolactone/Hydroxyapatite Scaffolds for Bone Tissue Engineering”, Proceedings of 2005 IEEE Northeastern Bioengineering Conference, Stevens Institute of Technology,  New Jersey, USA, April 2-3, 2005.
  133. Fang, Z. and Sun, W., “Image-guided Multi-scale Statistical Model to Mimic Random Bone Structure”, Proceedings of 2005 IEEE Northeastern Bioengineering Conference, Stevens Institute of Technology,  New Jersey, USA, April 2-3, 2005.
  134. Piatt, J., Starly, B., Faerber, E. and Sun, W., “Image Guided Craniofacial Reconstructive Surgery”, Proceedings of Advanced Digital Technology in Head and Neck Reconstruction, Edmonton, Alberta, Canada, March 10-13, 2005.
  135. Sun, W., “Computer-Aided Tissue Engineering”, Proceedings of the 2nd International Workshop on Bioprinting, Biopatterning and Bioassembly, Medical University of South Carolina, Charleston, SC, USA, March 14-15, 2005.
  136. Starly, B., Fang, Z., Khalil, S., Shor, L. and Sun, W., “Biomimetic Design and Fabrication of Tissue scaffolds”, Proceed. of the 2nd International Workshop on Bioprinting, Biopatterning and Bioassembly, Medical University of South Carolina, Charleston, SC, USA, March 14-15, 2005.
  137. Wettergreen, M., Sun W., Mikos A. and Liebschner M, "Geometric Characterization of Scaffold Building Blocks for Tissue Engineering." Proceedings of Transcript, Orthopaedic Research Society (ORS), Washington, D.C., USA, February 20 - 23, 2005.
  138. Sun, W., “Computer-Aided Tissue Engineering: Recent Advances”, Proceedings of International Symposium on Micro/Nano Thermal and Fluids Systems, the University of Tokyo, Tokyo, Japan, December 6-7, 2004.
  139. Sun, W., Shokoufandeh, A. and Regli, W., “Representation and Design Heterogeneous Structures”, Proceedings of 2005 NSF Grantee Research Conference, Phoenix, AZ, USA, January 3-5, 2005.
  140. Shor, L., Darling, A., Sun, W. and Guceri, S., ” Precision Extruding Deposition and Characterization of Cellular Poly-e-Caprolactone Tissue Scaffolds”, Proceedings of 2004 MRS Fall Meeting, Hynes Convention Center, Boston, MA, USA, Nov. 29-Dec. 02,  2004.
  141. Sun, W., “Solid Freeform Fabrication in Computer-Aided Tissue Engineering”, Proceedings of Symposium on Frontiers of Materials Science and Engineering 2004: Bridging Science and Manufacturing, 2004 ASM Materials Solutions Conference & Exposition, Columbus, Ohio, USA, October 18-21 2004.
  142. Fang, F., Sun, W. and Tzeng, J., “Asymptotic Homogenization Model for Prediction of Effective Properties of Composite and Heterogeneous Structures”, Proceedings of the American Society for Composites 19th Technical Conference, Georgia Technical Institute, Atlanta, Georgia, October 17-20, 2004.
  143. Gomez, C., Demirci, M., Shokoufandeh, A., Sun, W. and Regli, W., “Two-Phase Structure Representation and Design: Tissue Engineered 3-D Construct Connectivity Study”, Proceedings of the 2004 Biomedical Engineering Society Annual Fall Meeting, Pennsylvania Convention Center, Philadelphia, PA, USA, October 13-16, 2004.
  144. Khalil, S., Nam, J., Darling, A. and Sun, W., “Freeform Fabrication of Tissue Scaffolds via Biopolymer Deposition”, Proceedings of the 2004 Biomedical Engineering Society Annual Fall Meeting, Pennsylvania Convention Center, Philadelphia, PA, USA, October 13-16, 2004.
  145. Starly, B., Sun, W., Lau, A., Lau, W. and Bradbury, T., “Biomimetic Design and Fabrication of  Tissue scaffolds”, Proceedings of the 2004 Biomedical Engineering Society Annual Fall Meeting, Pennsylvania Convention Center, Philadelphia, PA, USA, October 13-16, 2004.
  146. Sun, W., “On Computer-Aided Tissue Engineering”, Proceedings of the 2nd World Congress for Biomedical Engineers, Beijing, China, September 27-29, 2004.
  147. Darling, A., Nam, J., Sun, W., “Hybrid Polymer Scaffolds for Tissue Engineering”, Proceedings of the Polymer Networks 2004 Conference (NIH/NICHD), Natcher Conference Center, NIH, Bethesda, MD, USA, August 16-18, 2004.
  148. Khalil, S., Nam, J. and Sun, W., “Biopolymer Deposition for Freeform fabrication of Tissue Scaffolds”, Proceedings of the Polymer Networks 2004 Conference (NIH/NICHD), Natcher Conference Center, NIH, Bethesda, MD, USA, August 16-18, 2004.
  149. Starly, B., Sun, W., Lau,  A., Lau, W. and Bradbury, T., “Biomimetic Design and Fabrication of Interior Architecture of Tissue scaffolds using Solid Freeform Fabrication,” Proceedings of 15th Solid Freeform Fabrication Symposium, Austin, TX, USA, August 3-5, 2004.
  150. Khalil, S., Nam, J., Darling, A. and Sun, W., “Multi-nozzle Biopolymer Deposition for Freeform Fabrication of Tissue Construct,” Proceedings of 15th Solid Freeform Fabrication Symposium, Austin, TX, USA, August 3-5, 2004.
  151. Darling, A., Mondrinos, M., Sun, W. and Lelkes, P., “Strategies for Heterogeneous Material/Architecture Tissue Scaffolds”, Proceedings of International Conference "Strategies in Tissue Engineering", Würzburg, Germany, June 17-19, 2004.
  152. Starly, B., Darling, A., Gomez, C., Sun, W., Shokoufandeh, A. and Regli, W., “Image Based Bio-CAD Modeling and Its Application in Biomedical and Tissue Engineering”, Proceedings of ACM Symposium on Solid Modeling and Applications 04, Genova, Italy, June 9-11, 2004.
  153. Khalil, S., Nam J. and Sun, W., “Biopolymer Deposition for Freeform Fabrication of Tissue Engineered Scaffolds”, Proceedings of the 30th IEEE Annual Northeast Bioengineering Conference, Western New England College, Springfield, MA, USA, April 17-18, 2004.
  154. Gomez, C., Demirci, M., Shokoufandeh, A., Sun, W. and Regli, W., “Tissue Engineered Constructs: Connectivity Study for Three Dimensional Two-Phase Structures”, Proceedings of the 30th IEEE Annual Northeast Bioengineering Conference, Western New England College, Springfield, MA, USA, April 17-18, 2004.
  155. Darling, A., Khalil, S., Nam, J. and Sun, W., “Heterogeneous Material Strategies for Tissue Scaffold Manufacture”, Proceedings of the 30th IEEE Annual Northeast Bioengineering Conference, Western New England College, Springfield, MA, USA, April 17-18, 2004.
  156. Darling, A., Sun, W. and Kriete, A., “Scaffold Informatics: Tissue Scaffolds Based on 3D Image Data”, Proceedings of Focus On Microscopy International Conference 2004, Philadelphia, PA, USA, April 4-5, 2004.
  157. Khalil, S., Nam J., Darling, A. and Sun, W., “Multi-nozzle Biopolymer Deposition and Freeform Fabrication of Tissue Scaffolds”, Proceedings of the14th Interdisciplinary Research Conference on Biomaterials, D. Bernache-Assollant and E. Champion (Editors), Sauramps Medical Publisher, pp. 77-84, Limoges, France, March 25-26, 2004.
  158. Schroeder, C., Bespalov, D., Fang, Z., Shokoufandeh, A., Regli, W., Lutz, E. and Sun, W., “Representation and Design of Heterogeneous Structures: Porosity Representation, Feature Decomposition, and Asymptotic Homogenization”, Proceedings of 2004 NSF Design, Service and Manufacturing Grantees and Research Conference, Dallas, TX, USA, Jan. 6-8, 2004.
  159. Gomez, C., Demirci, M., Shokoufandeh, A., Regli, W. and Sun, W., “Representation and Design of Heterogeneous Structures: Connectivity Study for 3D Tissue Engineered Constructs”, Proceedings of 2004 NSF Design, Service and Manufacturing Grantees and Research Conference, Dallas, TX, USA, Jan. 6-8, 2004.
  160. Sun, W., Nam, J., Khalil, S. and Darling, A., “Multi-nozzle Biopolymer Deposition for Tissue Engineering Application”, Proceedings of the 6th International Conference on Tissue Engineering, Orlando, FL, USA, Dec. 10-13, 2003.
  161. Nam, J., Darling, A., Starly, B., Fang, Z., Gomez, C., Khalil, S. and Sun, W., “On Computer-Aided Tissue Engineering”, Proceedings of the 6th International Conference on Tissue Engineering, Orlando, FL, USA, Dec. 10-13, 2003.
  162. Fang, Z., Gomez, C. and Sun, W., “Modeling and Homogenization of Mechanical Properties of Polymer-based Tissue Scaffold Under Biodegradation”, Proceedings of the 6th International Conference on Tissue Engineering, Orlando, FL, USA, Dec. 10-13, 2003.
  163. Starly, B., Gomez, C. and Sun, W., “Biomimetic Modeling and Design of 3D Bone Scaffolds”, Proceedings of the 6th International Conference on Tissue Engineering, Orlando, FL, USA, Dec. 10-13, 2003.
  164. Darling, A. and Sun, W., “Bio-blueprint Modeling for 3D Tissue and Organ Printing”, Proceedings of the 6th International Conference on Tissue Engineering, Orlando, FL, USA, Dec. 10-13, 2003.
  165. Darling, A., Nam, J. and Sun, W., “Scaffold Informatics:  A bioinformatics Approach for Tissue Scaffold Modeling and Construction,”  Proceedings of Symposium on Digital Biology: The Emerging Paradigm, NIH Biomedical Information Science and Technology Initiative Consortium, Natcher Conference Center, NIH, Bethesda, MD, USA, November 6-7,  2003.
  166. Blackmore, D., Leu, M., Regli, W. and Sun, W., “Applications of Computational Topology of Swept Volumes”, Proceedings of DIMACS Workshop on Computer Aided Design and Manufacturing, Rutgers University, New Brunswick, NJ, USA, October 7-9, 2003.
  167. Schroeder, C., Regli, W., Shokoufandeh A. and Sun, W., “Stochastic Geometry for Bio-Medical CAD”, Proceedings of DIMACS Workshop on Computer Aided Design and Manufacturing, Rutgers University, New Brunswick, NJ, USA, October 7-9, 2003.
  168. Bespalov, D., Shokoufandeh, A., Regli, W. and Sun, W., “Scale-space representations and their application to 3D matching of solid models”, Proceedings of DIMACS Workshop on Computer Aided Design and Manufacturing, Rutgers University, New Brunswick, NJ, USA, Oct. 7-9, 2003.
  169. Darling, A. and Sun, W., “3D Microtomographic Characterization of Precision Fused Deposited Biocompatible Polymer Scaffolds", Proceedings of 25th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Cancun, Mexico, September 17-21, 2003.
  170. Wang, F., Shor, L., Darling, A., Khalil, S., Starly, B., Güçeri, S. and Sun, W., “Fabrication and Characterization of Cellualr Poly-e-Caprolactone (PCL) Scaffolds,” Proceedings of 14th Solid Freeform Fabrication Symposium, Austin, TX, USA, August 4-6, 2003.
  171. Starly, B., Lau, A., Sun, W., Lau, W., Bradbury, T., Youssef, A. and Gaylo, C., “Direct Slicing of STEP Based NURBS Models for Solid Freeform Fabrication,” Proceedings of the 14th Solid Freeform Fabrication Symposium, Austin, TX, USA, August 4-6, 2003.
  172. Fang, Z., Sun, W. and Tzeng, J., “Asymptotic Homogenization for Effective Mechanical Properties of Electric Composite Conductors,” Proceedings of the 14th International Conference on Composite Materials, San Diego, CA, USA, July 14-18, 2003.
  173. Tzeng, J. and Sun, W., “Constitutive Modeling of Electrical Composite Conductor by Finite Element Method,” Proceedings of the 14th International Conference on Composite Materials, San Diego, CA, USA, July 14-18, 2003.
  174. Sun, W., “Biomimetic modeling and its application in computer-aided tissue engineering,” Proceedings of the 3rd International Conference on Photonics and Imaging in Biology and Medicine, Wuhan, China, June 8-11, 2003.
  175. Schroeder, C., Regli, W., Shokoufandeh, A. and Sun, W., "Representation of Porous Artifacts for Bio-Medical Applications", Proceedings of the 8th ACM Symposium on Solid Modeling and Applications, Seattle, Washington, USA, June 6-8, 2003, pp. 254-257.
  176. Bespalov, D., Shokoufandeh, A., Regli, W. and Sun, W., "Scale-Space Representation of 3D Models and Topological Matching", Proceedings of the 8th ACM/SIGGRAPH Symp. on Solid Modeling and Applications, Seattle, Washington, USA, June 6-8, 2003, pp. 208-215.
  177. Darling, A., Shor, L., Khalil, S., Wang, F., Güçeri, S. and Sun, W., “Micro-ct Characterization of Fusing Extruded PCL Scaffolds,” Proceeding of 29th IEEE Annual Northeastern Bioengineering Conference, NJIT, Newark, NJ, USA, March 23-24, 2003.
  178. Wang, F., Shor, L., Starly, B., Darling, A., Güçeri, S. and Sun, W., “Fabrication of Cellular Poly-Є-Caprolactone (PCL) Scaffolds by Precision Extruding Deposition Process,” Proceeding of 29th IEEE Annual Northeastern Bioengineering Conference, NJIT, Newark, NJ, USA, March 23-24, 2003.
  179. Starly, B., Gomez, C., Darling, A., Fang, Z., Lau, A., Sun, W., Lau, W., Bradbury, T., Youssef, A. and Gaylo, C., “Computer-Aided Bone Scaffold Design – A Biomimetic Approach,” Proceeding of 29th IEEE Annual Northeastern Bioengineering Conference, NJIT, Newark, NJ, USA, March 23-24, 2003.
  180. Yan, C., Starly, B., Gomez, C., Fang, Z. and Sun, W., “On Effective Properties of Heterogeneous Bone Scaffolds” Proceeding of 29th IEEE Annual Northeastern Bioengineering Conference, NJIT, Newark, NJ, USA, March 23-24, 2003.
  181. Fang, Z., Yan, C., Sun, W., Shokoufandeh, A. and Regli, W., “Asymptotic Homogenization Based Process for Characterization of Tissue Scaffolds,” Proceeding of 29th IEEE Annual Northeastern Bioengineering Conference, NJIT, Newark, NJ, USA, March 23-24, 2003.
  182. Gomez, C., Starly, B., Darling, A., Fang, Z., Lau, A. and Sun, W., “Biomimetic modeling and design of bone scaffold”, Proceeding of the 13th Interdisciplinary Research Conference on Biomaterials, Baltimore, MD, USA, March 14-15, 2003.
  183. Darling, A., Starly, B., Gomez, C., Fang, Z. and Sun, W., “Image-based biomimetic modeling and its application in computer-aided tissue engineering”, Proceeding of SPIE/BIOS 2003 – Symposium on optical technologies to solve problems in tissue engineering and tissue mechanics, San Jose, CA, USA, Jan. 25-31, 2003.
  184. Sun, W., Shokoufandeh, A. and Regli, W., “Representation and design of heterogeneous structures”, Proceedings of 2003 NSF Design, Service and Manufacturing Grantees and Research Conference, Brimingham, Alabama, USA. Jan. 7-9, 2003.
  185. Sun, W., Shokoufandeh, A. and Regli, W., “Representation and design of heterogeneous tissue structures”, Proceedings of 2002 meeting on Tissue Engineering at Cold Spring Harbor Laboratory, Cold Spring Harbor, New York, USA, November 21~24, 2002, pp. 27.
  186. Starly, B., Darling, A. and Sun, W., “Biomimetic design of 3D bone scaffolds”, Proceedings of 2002 meeting on Tissue Engineering at Cold Spring Harbor Laboratory, Cold Spring Harbor, New York, USA, November 21~24, 2002, pp. 45.
  187. Sun, W, and Tzeng, T., “An Analytical Modeling for Effective Mechanical Properties of Multi-phase Composite Conductor”, Proceedings of 34th International SAMPE, Baltimore, MD, USA, November, 2002, pp. 597-602.
  188. Gomez, C., Starly, B., Darling, A., Fang, Z., Lau, A., Sun, W., Lau, W., Bradbury, T. and Gaylo,  C., “Biomimetic Modeling and Design of Bone Scaffolds”, Proceedings of the 6th New Jersey Biomaterial Symposium, Somerset, NJ, USA, October 17-18, 2002.
  189. Sun, W., Starly, B., Lau, A., Lau, W., Lim, D., Seliktar, R., Youssef, A., Bradbury, T. and Gaylo, C., “Computer-Aided Design Modeling for Heterogeneous Bone Structure”, Proceedings of the American Society for Composites 17th Technical Conference, Purdue University, IN, USA, October 12-15, 2002, pp. 144-153.
  190. Sun, W., and Tzeng, J., “Homogenization Modeling for Mechanical Properties of Composite Conductor with Cooling Channel,” Proceedings of the American Society for Composites 17th Technical Conference, Purdue University, IN, USA, October 12-15, 2002.
  191. Starly, B., Sun, W., Lau, W. and Fang, Z., “Biomimetic” Model for Heterogeneous Bone Scaffold” Biomedical Engineering: Recent Developments: Editor, J. Vossoughi, 2002 Medical and Engineering Publishers, Inc., Sept., 2002, pp. 305-306.
  192. Darling, A., Sun, W. and Subbaraman, G., “BioModeling Assisted Three-Dimensional Organ Printing”, Biomedical Engineering: Recent Developments: Editor, J. Vossoughi, 2002 Medical and Engineering Publishers, Inc., Sept., 2002, pp. 237-238.
  193. Lim, D., Seliktar, R., Holman, J., Sun, W. and Nunes, L. “Finite element modeling of the shoulder complex using the data obtained from musculo-skeletal model and computerized tomography,” Biomedical Engineering: Recent Developments: Editor, J. Vossoughi, 2002 Medical and Engineering Publishers, Inc., Sept., 2002, pp. 73-74.
  194. Lim, D., Seliktar, R., Holman, J., Sun, W. and Nunes, L, “Potential Diagnostic Applications of a Finite Element Model for Glenohumeral Pathology,” Proceedings of the Annual Orthopedic Society Research Conference, New Oreland, LA, USA, Sept. 2002.
  195. Starly, B., Sun, W., Lau, W. and Nam, J., “Layered Composite Model for Design and Fabrication of Bone Replacement”, Proceedings of 13rd Solid Freeform Fabrication Symposium, Austin, TX, August 5-8, 2002, pp. 24-34.
  196. Lau, W., Bradbury, T., Youssef, A., Gaylo, C., Sun, W. and Lau, A., “XML Representation and Process Algorithm for Layered Manufacturing of Heterogeneous Objects”, Proceedings of 13rd  Solid Freeform Fabrication Symposium, Austin, TX, August 5-8, 2002, pp. 255-266.
  197. Lim, D., Seliktar, R., Holman, J., Sun, W. and Nunes, L, “FE Modeling of the Shoulder Using Mechanical Properties Obtained from CT Numbers,” Proceedings of the Fourth World Congress of Biomechanics, Calgary, Alberta, Canada, August 4-9, 2002. 
  198. Dcosta, D., Lin, F., Sun, W. and EI-Raghy, T., “Integrated Fabrication Process and Layered Manufacturing of Fully Dense Ti3SiC2 Powder-Based Structures” Proceedings of the 2nd International Conference on Rapid Prototyping and Manufacturing, Beijing, China, August 10-13, 2002.
  199. Nam, J., Dimovski, S., Lin, F. and Sun, W., “Rapid Prototyping Assisted Medical Modeling” Proceedings of the 2nd International Conference on Rapid Prototyping and Manufacturing, Beijing, China, August 10-13, 2002.
  200. Sun, W. and Tzeng, J., “Effective Mechanical Modeling of Composite Conductor”, Proceedings of 14th US National Congress of Applied Mechanics, Blacksburg, VA, June 13-15, 2002.
  201. Laurencin, C., Attawia, M., Khan, Y., Marcolongo, M., Ko, F. and Sun, W., “Towards an International Tissue Engineering Curriculum: The Drexel Initiative,” Proceedings of the 2002 American Society for Engineering Education Annual Conference & Exposition, American Society for Engineering Education, Montreal, Canada, June 22-24, 2002.
  202. Dcosta, D., Hu, X., Chiang, J., Lehmicke, M. and Sun, W., “CAD/CAE Assisted BioModeling and Design of Inter-Vertebral Implant,” Proceedings of 28th IEEE Annual Northeastern Bioengineering Conference, Philadelphia, PA, April 23-24, 2002, pp. 213-214.
  203. Hu, X. and Sun, W., “A Unit Cell-Based Design for Composite Application,” Proceedings of American Society of Composite 16th Annual Technical Conference, Virginia Polytechnic University, Blacksburg, VA, Sept. 10-13, 2001.
  204. Hu, X. and Sun, W., “An Information Based Design Support System for Composite Structures,” Proceedings of ASME 2001 Design for Manufacturing Conference, Pittsburgh, PA, Sept. 10-13, 2001.
  205. Chiang, J., Lehmicke, M., Dcosta, D., Hu, X., Lin, F. and Sun, W., “Rapid Prototyping Assisted Design and Development of Inter-Vertebral Implants,” Proceedings of 12th Solid Freeform Fabrication Symposium, Austin, TX, August 8-10, 2001.
  206. Dcosta, D. Sun, W. and EI-Raghy, T., “Freeform Fabrication of Ti3SiC2 Structures,” Proceedings of 12th Solid Freeform Fabrication Symposium, Austin, TX, August 8-10, 2001.
  207. Hu, X., Pang, J., Pang, Y., Atwood, M., Sun, W. and Regli, W. “Design Rational: Representation, Capture, and Retrieval,” Proceedings of 2000 ASME Design For Manufacturing Technical Conference, Baltimore, Maryland, September 10-13, 2000.
  208. Sun, W., Lin, F. and Hu, X., “Computer-Aided Composite Unit Cell Design and Modeling,” Proceedings of American Society of Composite 15th Annual Technical Conference, College Station, TX, September 24-27, 2000.
  209. Lin, F. and Sun, W., “Computer Modeling and Simulation of Single Fiber Pull-out,” Proceedings of American Society of Composite 15th Annual Technical Conference, College Station, TX, September 24-27, 2000.
  210. D’Costa, D., Dimovski, S., Lin, F., El-Raghy, A., Barsoum, M. and Sun, W., “Three-Dimensional Printing of Layered Machinable Ductile Carbide,” Proceedings of Eleventh Solid Freeform Fabrication Symposium, University of Texas, Austin, TX, August 7-9, 2000.
  211. Hu, X., Jiang, T., Lin., F. and Sun, W., “Reasoning Boolean Operation for Modeling, Simulation and Freeform Fabrication of Heterogeneous Objects,” Proceedings of Eleventh Solid Freeform Fabrication Symposium, University of Texas Austin, August 7-9, 2000.
  212. Jiang, T., Lin, F., Kaltman, S. and Sun, W., “Anatomical Modeling and Rapid Prototyping Assisted Surgical Reconstruction,” Proceedings of the Eleventh Solid Freeform Fabrication Symposium, University of Texas Austin, August 7-9, 2000.
  213. Sun, W. and Kumar, P., “Knowledge Plus Expertise - Engineering Education in Information Era,” Proceedings of International Conference on Engineering Education, Beijing, China, Nov. 3-5, 1999, Vol. II, pp. 1 - 9.
  214. Sun, W. and Bennett, T., “Strategy and Technology Infrastructure to Enhance Regional Manufacturing Competitiveness,” Proceedings of the 5th International Conference on Manufacturing Technology, Beijing, China, Oct. 31 – Nov. 3, 1999.
  215. Lin, F., Sun, W. and Yan, Y., “Axiomatic Design Theory Based Design Rules for Machatronics Products,” Proceedings of the 5th International Conference on Manufacturing Technology, Beijing, China, Oct. 31 – Nov. 3, 1999.
  216. Lin, F., Sun, W. and Yan, Y., “A Mathematical Description of Layered Manufacturing Fabrication,” Proceedings of the 10th Solid Freeform Fabrication Symposium, Austin, TX, August 9-11, 1999, pp. 139 - 146.
  217. Sun, W., “Beyond Solid Modeling – A Multi-volume CAD Modeling for Heterogeneous Material Structures,” Proceedings of the 98 International Conference on Computer-Aided Design, Guilin, China, October 8 – October 11, 1998, pp. 116-125.
  218. Sun, W. and Ko, F., “Computer-Aided Design and Simulation for 3D Fabric Composite Armor,” Proceedings of the Fifth International Conference on Composites Engineering, Las Vegas, July 5-9, 1998, pp. 863 – 864.
  219. Ko, F., Sun, W., Zavaliangos, A., Joulic, J. and Aly-El-Shiek, "Integrated Design for Manufacturing of Composite Helmet,” Proceedings of ADPA/NSIA Design and Integration of Helmet System Symposium, Framingham, MA, USA, December 3-5, 1997.
  220. Sun, W. and Lau, A., "Design for Manufacturability and Concurrent Engineering in Integrated Product Development Process,” Proceedings of Concurrent Product Design and Environmentally Conscious Manufacturing, Edited by S.B. Billatos and H.C. Zhang, 1997 ASME Winter Annual Meeting, Dallas, TX, pp. 113 – 124, Nov. 16 - 21, 1997.
  221. Sun, W., Lau, A. and Ko, F., "Integrated Design for Manufacturing of Composite Automotive Components,” Proceedings of The Fourth International Conference of Composite Engineering, Big Island, Hawaii, USA, July 6-12, 1997, pp. 953 - 954.
  222. Sun, W. and Lau, A., "DFMA in Rapid Product Development,” Proceedings of the International Forum on Product Design for Manufacture and Assembly, Newport, RI, June 9-10, 1997, pp. 152 - 161.
  223. Sun, W. and Lau, A., "A Knowledge-enriched CAD Modeling and Solid Free-form Realization for Heterogeneous Material Structures,” Proceedings of the Seventh International Conference on Rapid Prototyping, San Francisco, CA, March 31 - April 3, 1997, pp. 79 - 87.
  224. Sun., W., "Modeling of Flexible Piezoelectric Laminates," Proceedings of SPIE 1993 North American Conference on Smart Structures and Materials, Albuquerque, New Mexico, Feb. 1-4, 1993, Vol. 1917, pp. 497-507.
  225. Sun, W., Khatri, S., Lau, A. and Koczak, M., "Nonlinear Deformation Behavior of Thermoplastic Matrix Composites: Graphite/PPS, Glass/PPS and Their Hybrid Laminates," Proceedings of the American Society for Composites 6th Technical Conference, Albany, New York, Oct. 6-9, 1991, pp. 319-328.
  226. Sun, W. and Lau, A., "An Incremental Elastic-Plastic Model for Laminated Hybrid Matrix Composites," Proceedings of the 1988 ASME Winter Annual Meeting, Symposium on Advanced Composites and Processing Technology, T.H. Tsiang and R.A. Taylor Ed., ASME, N.Y., 1988, pp. 55-63.
  227. Sun, W. and Lau, A., "Ambient Temperature Constitutive Relation of ARALL Hybrid-Matrix Composites," Proceedings of the 1987 ASME Winter Annual meeting, Symposium on Constitutive Modeling for Nontraditional Materials, V. Stokes and D. Krajcipovic Ed., ASME, N.Y., 1987, pp. 147-159.

d. Technical report

1.      Sun, W. and Tzeng, J., "Effective Mechanical Model of EM Composite Conductor," US Army Research Laboratory Technical Report: ARL-TR-2647, 2002.

 

Patents:

  1. “Method for Fabricating Membrane Having Hydrophilicity and Hydrophobicity”, Invertors; LEE, Chang-Woo, KIM, Dong-Seob, SUN, Wei and HWANG, Woon-Bong; US Patent #: 8372297B2, Japan: 2010-550599, Korea: KR: 10-2008-0024030
  2. “Orthosis and Method of Use for Treatment and Rehabilitation of Dropfoot” Invertors: S. Siegler, Brett Hraban, Elizabeth LaMontagne, Joshua Meles and W. Sun; US Patent #: 8500668B2;
  3. “Micro Organ Device”, Invertors: Gonda, S., Chang, R, Starly, B., Culberson, C., Holtorf  H., Sun, W., and. Leslie, J., US Patent #: 8,343,740;
  4.  “Method and Apparatus for Computer-Aided Tissue Engineering for Modeling, Design and Freeform Fabrication of Tissue Scaffolds, Constructs, and Devices”, Inventors: W. Sun, J. Nam, A. Darling and S. Khalil, US Patent Application Pub. No.: 2006/0105011A1