T. Scabarozi, S. Amini, Electronic and thermal Properties of Ti₃Al(C_0.5,N_0.5)₂ Ti₂Al(C_0.5,N_0.5)and Ti₂AlN, JAP, 2008.

T. Scabarozi, S. Amini, Electrical, Thermal, and Elastic Properties of the MAX Phase Ti₂SC, JAP, 2008.

S. Amini, M.W. Barsoum, Synthesis and Mechanical Properties of Fully Dense Ti₂SC, JACERS, 2007.

S. Amini, M.W. Barsoum, Synthesis and Elastic and Mechanical Properties of Cr₂GeC, JMR, 2008.

S. Gupta, S. Amini, Tribological Behavior of Ti₂SC at Ambient and Elevated Temperatures, JACERS, 2007.

M. Bouchaib, S. Amini, On the Compression Behavior of Cr₂GeC and V₂GeC up to Quasi-hydrostatic Pressures of 50 GPa, JPCM, 2007.

S. Amini, M.Sc. Thesis Dissertation in English: “Production of Net-Shape Discontinuously Reinforced Metal Matrix Composites via Melt Infiltration Techniques“, evaluated and approved by the thesis committee as excellent, Grade: 4.0/4.0

S. Amini, B.Sc. Thesis Dissertation: “Extrusion of Miniaturized Thin-wall 6063 Aluminum Alloy Tubes”, evaluated and approved by the thesis committee as very good, Grade: 3.7/4.0

S. Amini, “Manufacturing, Mechanical Properties and Micro-structural Characteristics of Ceramic Preforms”, Proceeding of the 8th European Ceramic Society Conference (ECERS), July 2003, Istanbul, Turkey.

S. Amini, “Manufacturing and Property Evaluation of A356/SAFFIL and Hybrid A356/(SiC_P+SAFFIL) Composites via Squeeze Casting Process”, Proceeding of the Conference of Metallurgists (COM 2003), August 2003, Vancouver, Canada.

S. Amini, “Manufacturing of Alumina Short Fibre Reinforced Aluminium Matrix Composites via Squeeze Casting”, Proceeding of the Iran Foundry men’s Society Annual Conference, May 2003, Tehran, Iran

S. Amini, “Metal Matrix Composites in the Automotive Industry”, Journal of the Iran Automotive Industry”, January 2003

S. Amini, “SAFFIL and hybrid (SAFFIL+SiC_P) Preforms Produced by Spontaneous Settlement of Ceramic Phases from a Homogeneous Slurry”, Proceeding of the 3^rd Materials Engineering Conference, Oct 2002, Tehran, Iran (1^st Ranking)

S. Amini, “Metal Matrix Composites Manufactured via Melt Infiltration Techniques: The Best Substitute for Cast Iron and Steel Parts in the Automotive Industry”; Poster Presentation in the 5^th Iranian Steel Symposium, January 2003, Isfahan, Iran

S. Amini, “Manufacturing and Property Evaluation of A356/SAFFIL and Hybrid A356/(SiC_P+SAFFIL) Composites via Squeeze Casting Process”; Poster Presentation at Annual Conference of Metallurgists, October 2003, Tehran, Iran

2008, Outstanding Teaching Award, Drexel University

2000-03, 2^nd Ranking among all MSc graduates of Materials Science and Engineering Department, Shiraz University

2002, 1^st Ranking, winner of the Golden Prize as the Best Paper and Presentation; 3^rd Materials Science and Engineering Conference, Tehran, Iran

1994-95, 1^st Ranking among all graduates of Alborz College (Distinction)

2000-03, 1^st Ranking at Shiraz University Swimming Team

2005, Teaching Assistant; Introduction to Materials Science and Engineering; Drexel University

2004-05, Senior Engineering Mathematics Lecturer;  International House London, London, UK

2004-05, Mathematics Teacher; A-Level and GCSE; SBK Tuition Centre, London, UK

2003-04, Mathematics Teacher; Certificate of Student Tutoring Scheme; Mulberry School for Girls, London, UK

2003-05, Private Tutor; GCSE & A-Level Mathematics; London, UK

1995-03, Private Tutor; Mathematics, Physics, Chemistry and English; Tehran, Iran

2001-03, Teaching Assistant; Composite Materials (M.Sc. Course); Materials Department, Shiraz University

2002-03, Teaching Assistant; Materials Selection (B.Sc. Course); Materials Department, Shiraz University

2002-03, Teaching Assistant; Powder Metallurgy (B.Sc. Course); Materials Department, Shiraz University

2001-03, Teaching Assistant; Composites (B.Sc. Course); Materials Department, Shiraz University

2000-03, Laboratory Demonstrator; “Welding and Joining Laboratory”; Shiraz University

2000-03, Laboratory Demonstrator; “Mechanical Testing Laboratory”; Shiraz University

2000-03, Laboratory Demonstrator; “Casting and Solidification Workshop”; Shiraz University

2000- 03, Editor; “Journal of Metals”, Quarterly Journal of Undergraduate Students, Shiraz University

2008, President, Materials Research Society (MRS), Drexel University Chapter

2007, Vice President of External Affairs, Materials Research Society (MRS), Drexel University Chapter

2004, Certificate of Graduate Residential Course, held by Queen Mary, University of London and the Board of Continuing Education, Cambridge University, Cambridge, UK

Professor Michel W. Barsoum ; Materials Science and Engineering Department, Drexel University; PhD Thesis Supervisor

Professor Paul J. Hogg; Materials Department, Queen Mary University of London; Research Supervisor

Dr. John Behiri; Queen Mary University of London; Director of the Foundation Academic Programme

Dr. Ravji Pindoria; International House London; Foundation Programme Coordinator

Professor Sirus Javadpour; Materials Department, Shiraz University; MSc Thesis Supervisor

Professor Mohsen Moshksar; Materials Department, Shiraz University, Member of the MSc Thesis Committee

Professor Kamal Janghorban; Materials Department, Shiraz University, Member of the MSc Thesis Committee

Professor Mohamed H. Paydar; Materials Department, Shiraz University, Member of the MSc Thesis Committee

Professor Gholam H. Daneshi; Materials Department, Sharif University of Technology, BSc Thesis Supervisor