DOCTORAL STUDENTS
supervised by Professor Bakhtier Farouk
Present
students
26.
N. Hasan “Thermoacoustic
Refrigeration” (in progress)
25. E. Sayar “Acoustically Induced
Flows in Microchannels” (in progress)
24. D. Antao “Cryogenic Cooling” (in
progress)
23. D-H Lee “Electrokinetically Driven Flows in
Microchannels ” (in progress)
Past
students (with graduation dates)
22.
N. Uddin “Molecular
Dynamic Simulations of Carbon Nanotube Dispersion” (2010)
21.
S.
Hoque “Aerosol Transport
in Room Air Flows” (2010)
20.
Z. Lei “Thermoacoustic
Waves in Supercritical Fluids” (2010)
19.
T. I. Farouk “Atmospheric
Pressure Microdischarge Simulation” (2009)
18.
D. A. Staack “Chemical Vapor Deposition
in an Atmospheric Pressure Glow
Discharge” (2008)
17. Y. Lin “Thermoacoustic
Wave Induced Convection in Microgravity Environment” June 2007
16. T. Bartrand “Water Disinfection in Ozone
Reactors”, March 2007 (Co-adviser)
15.
M. Aktas “Acoustic Streaming in
Enclosures”, June 2004
14. F. Yan “Microchannel Flows of Gases and
Liquids”, June 2003
13. D. J. Greene “Modeling Approaches for
Disinfection in Chlorine Reactors”, June
2002, (Co-adviser)
12. K. Bera “Particle-in-cell/Monte Carlo Simulation
of Glow Discharge”, September 1999
11. D. Mitra-Mazumdar “Mass Transfer in a Multi-phase Flow
Reactor”, August, 1997, (Co-adviser)
10.
K. Nagayama “Plasma Assisted Chemical Vapor
Deposition of DLC Films”, August 1996
9.
F. Qian "Modeling
of Transport Processes in an Electric
Arc Furnace ", December 1995 (Co-adviser)
8. P. J. Lucas “Laminar
Flow in a Coiled Helical Tube “, August
1992 (Co-adviser)
7.
L. Yang "Transport
Processes in a Rotating CVD Reactor", August 1992
6. J. Lai "Modeling
of Subcooled Flow Boiling in a Vertical Tube”, August 1992
5.
H. Turkoglu "Analysis
of Gas Injection in Molten Metal", December 1990
4.
Y. G. Kim "Analysis
of Twin Belt Strip Casting"
November 1988, (Co-adviser)
3.
T. Fusegi "Fire
Prediction in Compartments", October 1988
2.
K. S. Ball "Mixed
Convection Heat Transfer in Rotating Systems", June 1987
1.
D. Wei "Modeling
of Thermal Plasmas for Metal Deposition", December 1986, (Co-adviser)